Search:

I got a mail with the zip file within 24 hours of payment

I have a CRP4848 and have considered adding a laser. How has this worked out for you and are you satisfied with the results you are achieving?

sorry I used the pocket tool in Vcarve Pro 8 it automatically cuts inside up to the line. i carved 4 pockets in the same piece of wood.. made in 1 Vcarve file


the first pocket was...

Add 1 more hurray for them I just got a pro4848 and they have been great. Questions answered FAST there was a mess up in Extruded that was sent that was handled in a couple days AWESOME...

I have a Joes'2006 i built 7 years ago and have been running fine I am upgrading to a CNCrouterparts 4848 and wondered if it breaks his rules to sell the old one..for parts No electronics they...

I am currently using VCarve Pro V8. I have created test pockets to verify the issue. I cut all of these in the same tool Path NOT losing steps because if it were second pass would show steps...

I built my 2006 R2 about 8 years ago now ... I have not regretted 1 min of it. I have made over 400 Arrow of light plaques and countless other projects as well as cut out parts for others to build...

I have searched thru the forums and dont see any discussions about using 2 anti backlash nuts per axis facing them oposing each other. I have Joes 2006 R2 and wonder if this would be asking for...

Awesome looking signs. What kind of bit did you use. I tried my hand at it and have had mixed results...

These are cut with a 60 degree freud v bit. Any advice would be great

This works great fitted to my Joe's 2006

Maybe I missed it somewhere. I was using the original MACH3 Blue screen set with the probe and the the X,Y and Z worked after a computer melt down I have installed the TEX version 3.2 and I am...

I had the same issue. I was sure something else went haywire. Tuning mine did not help. I did notice in the port check there was allot of noise in the graph,This had happened on 2 different...

Vectric Vcarve Pro and Mach 3

Does anyone have the spec sheet from the original 4 wire Probotix Green Monster stepper drive.

Probotics has a USB interface now don't think it works with Mach 3 yet. Mac h 3 Doesn't like laptops allot be careful.

I added a parallel port card and it is running fine off that. Must be something a miss with the built in port..:banana:

I have run driver test on both. They both pass. BUT.. on the HP that it worked on the line is very smooth on the new computer there looks like what I would call allot of static. Wonder if I...

I have been using Mach3 on an HP dc5100 sff desktop running windows XP and it has been running fine. I updated to a larger tower with more memory and and also running windows XP. I have reinstalled...

I built my Joe's a year ago now. Only issue I have had is dust getting in my bearings locking them up..Does anyone have any good pics or plans for a dust shoe for the Joe's 2006 R2 I have a penn...

Just a couple of questions

1.) What controller software are you using?
2.) What lead screw are you using? 1 2 or 5 start

I cut at about 120 ipm and to eliminate my table shaking i changed the setting in Mach3 for the acceleration slowed it down and most of the major table movement disappeared.

I went with the probotix kits
http://www.probotix.com/3_axis_stepper_motor_driver_kits/3_axis_monster_stepper_motor_driver_kit/

they have been very helpful and prompt with delivery. I had one...

Here is the county seal shrunk down to a coaster size.

I have been using my CNC to cut out and engrave presents and just for fun. I have a camp that wants me to carve basic signs to label the buildings and paths for the campers. I have no idea what the...

I got 6 of their smooth clamps 1 for each end of the lead screw i got 3 of their couplers and 3 of their backlash nuts. I also got thrust bearings from McMaster carr and put that between the clamp...

YUP your right i missed that entirely. I used it to etch my brothers county seal into 1/4 plexiglass he is gonna edge light it this is so much fun. The only thing I need to work out is a good dust...

Looking at some pics on here I have questions about the spindles.. I am using a Porter Cable 690vslr router but it seem like most of the pics the bit extends farther down from the router than mine...

Finlly a working machine!!!!!!! YEAH!!!!!! cut out the picture in 2 hours 10 min never missed a beat didn't have any real good wood the size so MDF had to work for now but WOW! Thanks to...

I did use 1/2 for everything but Used 3/4 for the gantry sides hoping that that would prevent some of the flex I had been hearing about.. It kinda messes up the bolt list a little.

Burned up one of the stepper driver boards had to wait for the replacement. Now that it is all back together. I leveled the table attached the "T" rails and got some wire wrap to secure the wires. ...