Search:

Hi

Mach3 with many of Interface board, I'm use Windows 32 bit (XP, Win7 32 bit)

Never work with 64bit & also Mach3 is 32 bit software.

You guy can install in Windows 64bit and Borad...

Does your value of Steps per, Velocity, etc. is correct ?

326866

Also for easier set the Steps per value, you can go to setting page select axis and moving data and length by measure.
326868

I will out of my state for a week. But will back to ensure that you can run this unit.

1. Did you try to run Drivertest.exe in Mach3 folder to ensure the signal & kernel speed.
Mostly I use 25000 Hz (your setup is 35000 Hz, for me this 35K did not pass driver test)
325530
...

It as what I said before.

this line "[BILLET X1.6 Z2.8" will not any movement or effect to other line. Writer may need to wrote some comment or note to tell what this program are.


Suebsak

If thermal growth. Mean the machine will have 2 turret 2 ballscrew in each turret.

Does it ?

What you need from that CNC machine.
1. Part Material to be cut.
2. Part Dimension Tolerance.
3. Size of Part to machine.

Suebsak

Did you check the spindle baring runout and other when it have load and no load at the spindle.

I'm not sure which book you read.
...

It up to precision and material of you job.

Converting manual machine to CNC you need know how support. Also think about your part's tolerance will be machine.
Buy the already CNC you need you...

check any single cable had loose. sometime the fiber optic cable has dirty, clean with care.

The other way if you can see the x-axis ball screw, and can't find the release button.

Power off the machine turn the ball screw by hand to move the X-axis down.

Try to find the Overtravel release button on machine panel some machine is at Mc On button, some maker has separate near to the door, some maker call "EM"
Some machine just use the Jog button to...

If I'm correct MV45/40 is Milling Machine ( Machining Center)

So, Milling Machine will use feed rate value in Feed per Minute (Inch or MM) not Feed per Revolution as the turning machine.
That...

Which mode you use MDA or Auto it not the same mode also function to use.

If you edit NC program in MDA it may not simulate the tool path in monitor.

in Auto mode you can use Simulate in 2...

[BILLET X1.6 Z2.8 in NC program will no meaning to machine operation.
After this line I thought you understand that.

In this line the letter "[" normally is use in Macro programming for...

My idea you read a book of Peter Smid's as Ryan had told.

How to wrote the CNC program, you need to understand step of cutting operation. If you can use the convention machine, please think...

face mill holder have the straight shank holder. Select one that can fit to the biggest ER20 holder size (may be Dia. 12 mm )

Can't until you gave more information as their ask before.

Together with the measuring system you use to measure the tool length offset with you mention this error.

I though you need EDM or the one call "super drill" to burn it out complete.

Should the EDM drill electrode side same as the core drill diameter of you drill bit.
after complete the drill bit...

I use this file for our part inspection ship to customer.

See if you can modify and use it.

The one that lost in this file is the drawing picture that we create the number relate to dimension...

mail to me at [email protected]

I'm not sure what I have, you can use it.

“CNC Machining Center Construction & Testing as per ISO-TC39”

Course Abstract
Two day seminar to provide understanding the ISO/TC39 Standard apply to CNC Machining Center and Fundamental of...

I'm not sure what the holder's look like, also not have a picture to see.
In my experience the coolant holder adaptor that allow coolant go in "thru hole of cutting tools" need some modification on...