Search:

would like to see this finished product, I guess I will have to go and support a new downtown St.johns NL, local pub as well i guess.

here is the result, thanks for the help
http://www.cnczone.com/forums/attachment.php?attachmentid=381408&stc=1

On the hunt for a dxf, eps of a older GTO judge silhouette. I have something but not able to get a great usable file, maybe someone out there has something to share

all the best
fortyeight
...

try this out

I have been using artcam for years, I have recently purchased vcarve and wondering if there are any issues with having both on the same PC. I am sure the PC can handle both pieces of software, it has...

Material thickness I use is 3/8" and 1/2"

I should of mentioned that i also blow compressed air at cutter end, while cutting,...

I have a CNCRP PRO4848 and a benchtop pro. I use industrial strength two way tape to hold the material down, I also will hold the perimeter of the material with some sort of clamps, the clamps are...

I cut a lot of cell cast acrylic. Usually run 100-120 IPM for both 1/4 &1/8. I favor the Amana Tools acrylic cutters, they produce good cuts with lasting results.

Thanks fellors,

I will look in to all the thoughts.

Just returned from my shift at work got a few things i would like to make these days off. As well as the finish of the new addition...

Kept getting this warning today. try'd a few things but no success,
Warning displays a few mins into toolpath after each restart.Changed the toolpath, restarted PC and a few other things.
I have...

would think it is the gecko board.
I had a similar setup on a previous machine where all drives ran off one board, and one of the axis went to ground for some reason rendering the board useless,...

Well I have enjoyed my benchtop pro so much, myself and the old man have ordered a new 4*4 pro series, cant say enough about the guys and their machines, great bunch, great support, and great...

not sure if this file was for me but unable to open

any out there have a dxf like this not have much luck converting

351690

thanks
the files came from vectorclip3d.com a great source for relief files

Some weekend projects
348354
348356
348358

was able to get something put together, i think he will really enjoy this one, the 3d look in acrylic is nice
347584

In search of a silhouette of an old mustang mach 1

thanks in advance
fortyeight

try this out

336674

needing some help to convert this into something usable, I have not had much luck, even a separate dxf for the anchor and buoy would be helpful.

Trying to put something together for a...

i have been a Delcam user for a couple of years now, purchased a download version of its artcam express, I recently have been having trouble with my computer and don't think I can transfer on another...

Thanks
This file came from vectorclip3D

weekend project for a friends new home314074

5050 SMD RGB LED tape

was asked for a challenger dxf i had used on a project for an edge lit sign. maybe others may like to have as well

307318
all the best to all
fortyeight

sorry for the delay, was in transfer from work to home,
glad to be back on land.

not sure exactly on the duty i would have to dig out the bills, but it wasnt that much, was well worth it

I had them take care of everything, they arranged everything, I got a phone call from who took care of the border crossing for me to pay the duties and taxes.

The machine is excellent very rigid and capable, I have not machined any amount of alluminum, a little but not alot, but there is someone on this forum who specifically purchassed his BENCHTOP PRO as...

Another thing I like about the plug and play setup is that if by chance a driver fails you can replace just that driver, and if you have a spare on hand you will be ready to go again quite fast.
...