why not make a hold plate to hold the base peices and do them just on the mill i dont have one of those fancy toys yet but me it would seem much less trouble and then you can do several at the same...
Type: Posts; User: |eric|
why not make a hold plate to hold the base peices and do them just on the mill i dont have one of those fancy toys yet but me it would seem much less trouble and then you can do several at the same...
in an typical north american pannel each connector is a "phase" now there are 2 kinds of 220v : you can have either 3+1 wires or 2+1 wires
- now 3+1 one is 3 covered 1 uncovered wire this is...
do the cabling from outlet to pannel then have it aprouved by electrician all you need is amperage you require and such and you can hook it up ( if its just 220 regular)
i did some calculations the minimum i come up with is about 15k$ ( just a blank Tormach1100 mill no options really) highest with all the stuff i want (and dont really need :P ) is about 25k$
in...
in my experience your experience with others is largely due to 2 aspects 1st is your own attitude, tone , and politeness the second is environmental : basicaly the other person's state of mind when...
basically just to clarify its not that i cannot afford the mill its just that thinking about it i have a hard time justifying the spending .
i have an idea a few ideas about what i would make "as a...
here is the bit of knowledge my brother shared to me about machining parts : accuracy is a factor of how well you can measure.
if you can mesure precise your tollerances can be very low ( more...
i was looking at small desktop mills like grizzly and even a syil but price wise their minimum 3k of investment so if im going to put 3k on a mill that im going to overgrow might aswell put it to a...
i have been reading online and watching videos about milling and machining stuff out
now i was wondering how the heck can i justify a pcnc 15k investment in a hobby :idea:
i already work 40hrs...
"What do you mean by interrupts." interupts are the same for all the pc hardware up to the latest generations its all backwards i mean backward compatible ( software wise) only thing that changes...
isa + pci port does exists i would spring for a pentium 3 board wich should also have a agp card slots
as for VGA ... all cards past 286 are VGA cards ... "vesa Graphic card" witch only means it...
honestly : format c: /s ... (in geek therm reinstall windows choosing the long format option ( no quick format) the only way IE gets corrupted is : bad programs or bad programming either way dont...
cable from provider --> Modem {sbv5222} (ethernet port) -> (wan port) router [WNDR 3800N600]-> ( airwaives) -> wifi card on the laptop
now airwaves is a bit simplified your laptop if at all...
you have several choices : either
- connect tru network and use a ftp client (it exists for dos) but you require a network card and proper drivers for it .
- install win3.1 (or more) + winsock +...
machineries handbook ? i dont know jack but my brother does :P ( this is like a bible you can make space shuttles out of this stuff...) its a reference book tho. ty for the list ppl because i was...
i dont remember if 2008 supports legacy mode for domains ( eg old nt4 domains) if so just run your domain in that mode and you can still have your devices connect to that domain
now if it dosent...