Give Brad at Dynamic Machine a call he services these machines and may have a keypad available, the screens are becoming rare and it difficult to get new screens, I always wanted to try to figure out...
Type: Posts; User: Ringtech
Give Brad at Dynamic Machine a call he services these machines and may have a keypad available, the screens are becoming rare and it difficult to get new screens, I always wanted to try to figure out...
Fagor has the new 8035 package to retrofit an older control, its over $5,000
but its brand new with a warranty, other wise for an 8025 call Brad at Dynamic Machine
If your retrofitting an good machine and you want good 5 axis performance, go with a newer 8055 controller, they are much faster than the 8050's and Fagor offers all the options to upgrade the...
download a copy of Fagor windnc from their corporate website
Máquina herramienta, Medición, Motion control, Energía : Fiabilidad en todo el mundo : CNC, DRO, encoders, reglas, inversores de...
I would appreciate a copy of the PLC and parameters, I may have access to the code for the Spindle and C axis plc code, can you tell me the software version of the control you have. Press:
MAIN MENU...
the 064 alarm is a general fault alarm, in your case it sounds like a 24v short circuit on the wire.
Open up the control box and check that the wires are in good order and did not chave on...
I have a client that wants everyone he can get, so I'm sorry I don't know of any that are available.
Does anyone have a Proteo TL-25 lathe with a fagor 8050 controller.
I need the PLC programs and the parameter tables.
The machine has been idle for a year and the memory got corrupted loosing all...
pull the card. it should have a code on it with the options,
write down your hardware ID code, and call Fagor local support.
they can reprogram a card with the options on it, how much memory does...
can you read and understand the fagor plc?
you should be able to determine the M codes from the plc.
Read the input and output list and look for toolchanger related inputs.
there should be a...
tinmuk did you call Brad at dynamic he has parameter lists for these retrofits as well as all CMS upgrade machines.
949 525 3547
Hi Todd, thats exactly what I was going to post :)
M01 is internal to the CNC and as Todd so eloquently described, just add the code to the PLC.
An 8025 controller tops out at 9600 baud
An 8050-55 controller can go up to 115200 baud
before you do anything check that the cable you have for a fagor 8025 is wired correctly, you use pin 7 on cnc to pin 5 on pc
see this manual...
Windnc will not recognize a USB port without it being configured as a COM port, the iogear comes with software to map the usb port to com ports, you should see the choices when you configure the...
try giving Brad at www.dynamiccnc.com a call he has a source for rebuilt motors, tell him Roger refered you
Hi Everyone, I used to do applications for CMS / upgrade Technologies, I have a lot of experience with the Fagor controllers on lathes, 8025-8040-8050-55 8055i. I do a lot of programming and custom...
I do this all the time,
http://www.iogear.com/product/GUC2322/
Remember the 8025 and 8050-55 controls have different wiring
Have you called Brad at Dynamic Machine Resourses, he has a tech called Paul who would know how to do that,
www.dynamiccnc.com