Search:

I had the same problem on my vf2`07 , the machine worked but sometimes on higher RPM`s the error comes out.

I noticed 2 things :
1/ on lower RPM`s the spindle speed was same like I entered, but...

yes, is it so hard to try ? 10 sec. in front of the machine and wait few hours for an answer ?

Yes , will not fit with the covers and Z slide cover , too big , I`ve drawn mine with 20tools and later needed to redraw to 18tools.

The control does not care how much , it is only a number, so...

I have a rotary question too :

I have a rotary axis that has a name on it " HRT 310 H " a big gray one `08 , but I can not find that name on the 4th axis settings screen , I have either " HRT310...

I saw that and remember too , but I asked for a crane mounted on the back of the machine like here : ( PHOTO )

Hi all ,

anybody has a crane arm ? how does it look like ? hot does it help ? is it worth the money ? it is possible to build one alone ? can someone make some photos ?

Thanks
Peter

please read the manual " Spindle Probe Manual.pdf " site 9-46 , macro : O9843

It is a volumill or truemill strategy , see it on YT :

YouTube - Swift Carb RampMill with Truemill Cutter Path - Heavy ramping, helical entry

normally probing is moving separate in X or Y , this is requiring a fully normal calibration you done before, but for all other probing when the probe moves in X and Y axis together you need a more...

But do not forget to calibrate the probe with a vector calibration macro ;-)

Peter

Ken, No problem and thanks.
More photos of work progress : Picasa Web Albums - Piotr - Haas - zmieni...

Peter

guypb, I am using probes to check parts quite often - many times a day using VQC and writing some codes by hand , I can not imagine to work without them, If you ask what you asked I am really wounder...

motors are original haas parts ( eg. ebay 180474971575 ) and sorry this is BT40 , 90% parts are from alu , only the arm is steel.

Thanks a lot , I hope that the HAAS guys don`t mind ;-) maybe someone will do a opensource changer ;-)

I was attempting to build a side mount tool changer , but the complexity level of these two...

just Txx M06

the motors are plugged into I/O Board , so the machine think that he has an original tool changer.

Hi all , just wanted to share with you and attached a tool changer project , may be handy to build an tool changer if someone doesn`t have one. I`ve build one from that project and it runs for more...

I`ve changet #556 to 0.05 half year ago , and I am more happy than before :) , faster cycles and never had any collision.

Current and commands -> few times PG DN ( until macro variables ) -> few...

I don`t see an option in G47 , but you can try making many G47 with different Z depth , and to don`t loose the serial count making macro #599=#599-1

Peter

this cable should work : 10' DB9 Female DB25 Male Null Modem Serial Cable RS232 - eBay (item 380274269989 end time Oct-29-10 21:25:56 PDT)

Peter

you can make your own cable , all of this is described in the manual ( see attached file ) hyperterminal is OK , set the same speed parameters both on mill and PC ( I use 115200 7 E 2 , and shielded...

there is no way to put it into a specific cell without a through software.

I still don`t know what you`re trying to achieve , are you trying to modify a existing one or make a completely new one...

there are many occasion in with these three types of programming has his own benefits , usually I do programs in CAM , there is no way to do a hand nc code faster than with a smart cam (even doing...

I do this from time to time and have no problems , check the serial port for same parameters on mill and (not) PC ( speed, parity , bits , stop bits ) use the upper serial port on the machine , when...

#254 spindle center ( number of encoder steps from X home )

I like haas machines , but I`m angry that they are not going with time , they still build same machines like in the 90`s , the whole frame in the VF series does not change ( much ?) , besides the...

be aware - if you using hole machining instead holes 5d you can be very surprised for the times a simple hole can be done for more than 5hrs ;-) it just wrong calculate the drilling times.

it is not possible explain what you do via writing posts, probably you missing something and even don`t know what , so my advice is : make a short video ( camtasia , hypercam ) put it here , we will...

same here 5 years - no problem

WGJ - where have you lost ?

few nice features and more stability i noticed.

sorry , I didn`t tell that I do pause while tapping ( I do not ! ) , I meant pausing right before tapping , I can do that on TM , I can not on VF , thats something wrong.