Search:

Hello to all in the forum
I have one vmc interact 412 with control tnc151, the spindle have a motor fanuc model 3 with one drive AC (A20B-1001-0120) also fanuc, the problem is that the spindle don't...

thank you very much
the information is very complete, i think that is it what i need, i will make some tests and report the results.
again thank you to share this information :)

thank you for the help
I already made the test and the results are:
1.- the points 1,2 and 3 are fine, the parameters of the machine are correct.
2.- the drive sometimes don't have energy, the...

thank you very much for the guide i will make this test and i will inform him the results.
thanks again.

thank you for the answer
the motor is model 3 Nr A06B-1003-B100
the drive is A20B-1001-0120 FANUC AC SPINDLE DRIVE TOP CARD, and A20B-0008-0240 ORIENTATION PCB W2 RACK.
any suggestion or...

hello to all
I have one cnc VMC interact 412 and now i am giving him maintenance the tnc 151 control works fine but the spindle dont run, the spindle have one AC servodrive FANUC model...

Hello I need to move a cnc lathe but i dont have any manuals for it i wonder if someone have manuals for a chinese cnc lathe model ck6140 or where i can found information for this lathe? thank you...

thank you for the reply Gus
I will try call heidenhain for more advice i hope that solve this.

thank you Gus
actually my last hope was that, because now my main suspicion is the control, anybody know if some type of code exist in the leds of tnc (only light four and one of them turn off and...

Hello
I need some advice for my tnc 151 control, because dont start, it was working fine but suddenly turn off and now don't start my machine and only 4 leds turn on in the tnc151 and the VDU is...

thank you very much
with the parameters i could reach the home switch.

apparently this is the information that i need, today i will check your suggestions and post the result.
thank you, this site is awesome.

Hello to all people of this forum
I have one cnc miller with control fanuc 0m and have the next issue, i cannot index my machine (home position) the micros work fine but the axis travel stop before...

i don't know what happen with the control panel but now m03 or m04 work fine only remain the detail of the start buton in the spindle section of the control panel. only work in the jog position i...

i will check the control panel and report you the results.
thank you for the answer.

Hello to all.
i have a cnc lathe mory seiki with control fanuc6t-c, i am giving him maintenance and have the next problem, i can operate the spindle in jog (mdi,command,m41,s100, and jog button) but...

hello machinemen
I have problems with my cnc lathe hitachi seiki nf20-dt with control fanuc 6t-c, the lathe had lost the parameters but somebody helps myself with a copy of them (for the micon8 plc)...

hello to all
I have a mori seiki lathe model nf20-dt with fanuc 6t control, anybody have one machine like this? and wanted to send me the parameters?, also anybody know if this machine have two...

hello guys
i have a cnc miller bridgeport interact1 mk2 (attach image) but the machine it arrive without brake and any of the components of it, any body have one machine like this?, I need to know...

thank you very much ktb100
you send me a very detailed explanation, i will try your suggestions
regards and one more time thank you.

hello to all
I´m just started to use a cnc miller with fanuc 0-m control, and i have a doubt for begin to program the control, how can i define the zero for the program (absolute, incremental?) my...

Hello guys
I still have problems with my cnc miller bpt with tnc 151 control but now only need the spindle analogue output ( 0 to +/- 10 volts) from terminals J4/9 and J4/10 but don't have this...

thank you guys.
the situation its this: the machine already was working, but when the technicians painted and finish the machine, after appear this problems, the leds in the drive its ok (led 3,5,8...

thank you for the quick answer, the drive is KTK drive (sol-1, fac1-r, mti-1) i have the notes from machintek but i'm not sure if the problem its the drive or the control, i dont think that the...

thank you for the answer gridley51
what is the signal that should receive from drive? the led's of the drive its ok(before comand spindle run) but when input comand to spindle, the machine not...

hello to all
i have one problem with the spindle of one cnc miller bpt with tnc 151 control, all in the machine work fine, but the spindle dont turn i have the notes from machintek and the only...

Thank you Al_The _Man, but my drive is BOSCH D-6120 you have any information for this drive? attach a photo of my drive
thank you

thank you, the problem is i dont know if the companie still support them.

thank you for the suggestion, that test already made it and the problem moved at other axis so i think the drive is the problem, now i need to know if the drive can still be calibrate or if its...

thank you machintek, today i will continue making test on this points i still very confuse, i still thinking that the problem is the drive card.