Search:

Kerf was not the right word to use, I mint to say bevel, from what I understand the WJ
cut speed is slowed around corners to keep the bevel to a minimum.

I have Autodesk Inventor 11 Pro that I...

I have been looking into the water jet market and I found out real quick
that I don't have the funds for one.

So I'm going to build my own 5x10 table go plasma using Mach as the controller...

My sealed L-cheap-os are doing a good job, We'll see how long thay'll last.

Well it has some L-cheapos sealed bearings in it now, so far so good we’ll see how well
they do over time.

I took the original ones apart and the races look perfect but the ball are not shiny...

This type of bearing is in the mid 5's even from them.

I'LL try to get a screen shot and a path to the timer today.

I looked today it's 840hr's

Hi guys it’s time for a new set.

They started whining a few days ago and they got so loud that I couldn’t stand being in the shop with it running.

I took the spindle out of the machine and...

The table is very soft, if you bump it with anything like a hold down clamp
or a wrench it will have a ding in it.

I have a Enco 9x49 vertical mill and the table is VERY hard and smooth as glass....

Well what do you guys think, 500,1000 more?

Allennella and Lens cad, thanks for taking the time to post your#'s

I see that you guys have been signed up to the forum for some time but you don't post much but thank's again for your time!

Wow, that's interesting.

sharpshooter90

If you know how to search that site then search it for us and post a link with some #'s

If you do you would prove all of the nay sayers wrong.

I'm weighting!

Well if you have a machine just post your serial #.
That would be a start.

You mite be old fuzzy and blurry but that is one slick setup.

Looks like Bluefin has # 1320, do you guys think that there’s 1320 + machines
out there?

The Yahoo group just broke the 500 mark...

There's a guy on the Yahoo user groups that put what looks like toilet receptacles and mounted one on the enclosure and the other on the control cabinet and put
a piece of tubing between them.
...

Had to saw a holle in my encloser to see it.
I rubed a little grease in the stamped #' so you can see them.

Thanks Zephyr9900 for the heads up!
...

Yea it is. My bad I ran out of the shop and dug around in the file cabinet and thought I had it, sorry. I'll do some more digging and post it.

I looked on my machine but didn't see it.
I thought...

http://i171.photobucket.com/albums/u315/TTAWD/TECHSHEET.jpg

Please don’t take this the wrong way but you sound
like you’ve done this type of thing before, so why not just post the #’s

My S# is 3106.

It was invoiced 6/07

Any one have any idea how many have been sold?

Whats your serial#?

I been using my draw bar for about 3 months now.

The best test so far is a .500 roughing endmill taking
.300 a pass climb cutting @ 10 inches a minute feed
in .500 steel plate.

Anything less...

No I don't work for Tormach.

Thank's for the heads up.

It is an extrusion that’s being supplied by the customer.

I thought I seen a wire plugged into the accessory port.
Isn’t that where the Duality lathe plugs in?

Can you use it with Duality Lathe?

I had a 50x50x14 metal building give to me
and I am in the posses of poring a slab for it.

My question is about insulation.
The building had the standard 3” thick fiberglass with
white vinyl...

http://i171.photobucket.com/albums/u315/TTAWD/PANA0244.jpg
http://i171.photobucket.com/albums/u315/TTAWD/PANA0243.jpg
http://i171.photobucket.com/albums/u315/TTAWD/PANA0242.jpg

I’ve run this job...

I have seen Hoss setup.

When you loosen the draw bar you have to tap it
to “un-stick it” and then the holder will fall out.

I put 25-30 hours of spindle run time on my machine ever
week and...

I’ve been working on an auto drawbar for my mill.
I’m not trying to start an argument but shed some light
on your draw bar.

When I do a tool change I put about 65-75 degrees
of rotation on the...