First let me say thank you to everyone who responded. I think I have it figured out. I had only done two things to the CNC between the time it was running nicely and when I started having stalls. One...
Type: Posts; User: michaelcotter1969
First let me say thank you to everyone who responded. I think I have it figured out. I had only done two things to the CNC between the time it was running nicely and when I started having stalls. One...
That's an interesting thought that I hadn't considered. I'm suing 4 960 in-Oz motors I purchased from Avid CNC. The X axis rapids at 120 inches per minute (3000mm / min) and my acceleration is set to...
awerby thank you for responding. I had considered swapping the driver and power supply on the X with the Z axis but before I tried that I just ran the Z axis by making it rapid up and down and was...
First let me say thank you to anyone who is taking the time to read and respond. I have a home built CNC router constructed of extruded aluminum. All 3 axis ride on Linear rails and are driven by...