Search:

Good grief... Seriously??? Why would anyone still be using Win2K and expect it to work right with new software 17 years later?

Case in point.... :)

It would be helpful to use proper English sentence composition so everyone can have a reasonable understand what you are asking. Hint... reread before posting usually helps. Glad your problem was...

Not saying anything bad toward Jon.N.CNC... every so often you run across someone that is totally clueless, using an oddball cnc program, home grown stepper or a Chinese controller that has a ton of...

Check to make sure "exact stop" isn't checked. If exact stop isn't checked then try changing CV stop angle to 180 and see if you have the same problem.

If I understand what you are saying, the problem only occurs when the probe clip is attached to the cutter bit but works ok if you touch the clip to the zero plate. Typically these types of problems...

Was running Mach 3 ver0.062, Smoothstepper and Gecko 540. Got tired of constant Mach 3 issues, unfixable bugs, lousy CV control and unpredictability. Mach 4 is no better and $200 for a half...

Go into Control Panel ---> System and Security---> Device Manager---> USB and open the USB hub connected to the UC300, select Power Management tab and uncheck "Allow Computer to turn off this device...

I assume VisaCNC realized from a business standpoint putting all your eggs in ArtSoft's basket is not a good idea. Mach 4 is far from a finished product with no light at the end of the tunnel and...

I imported my smoothstepper/Gecko 540 Mach 3 xml and it worked fine for the 400ETH. Just had to rev the X direction active low check box. Under configuration tab ---> Z axis make sure the "axis...

VisaCNC now has pendant plug-in available in their website under downloads.

25 is the default safe Z retract. Question is what is 25...metric or imperial? 25 = slightly less that one inch.

Buttonnumber 20000 to 20999 are calling macros directly, I mean this range of button codes are used to call the same macro number directly,
so for example if you make a button with number 20000 then...

I used the UCCNC screen designer and deleted "Zero All" button after accidentally clicking it more than once. Its a good idea but the button is too close to the individual axis zero buttons.

I'm running the latest version and my display, buttons, numbers are very crisp. I'm working on adding a M6 tool change button and a simple Z zero and removed the unused A, B, and C axis displays on...

I just got my ETH400 up and running with out issue. First, setup the ETH400 Ethernet connection and make sure its communicating with the pc. Follow the setup steps in the ETH400 users manual. Make...

With any troubleshooting take it one step at a time and see if it helps or not. Making too many changes at the same time can lead to trouble. I'm not sure the comm buffer at 0.1 sec. that needs to...

Try setting the uccnc software kernel speed to 25 khz and see if that helps. In most cases 25 khz is more than enough. I believe the default is 100 khz. Open the task manager while running and watch...

According to Lee from VisaCNC a UCCNC pendant plug in will be available sometime this month. The web site's plug-in download page already has a place set up for UCCNC but nothing listed yet.

What Windows version are you running and how much memory does the PC have? Sounds more like a PC problem than controller issue. Go into device manager, open the USB driver connected to the UC300 and...

Ummm.... I ordered a UCCNC Ethernet card almost two weeks ago. Still hasn't shipped as of today. I emailed cnc4cp and Arturo Duncan said it would ship last Wed. Well it's now Monday 5 days later and...

I don't really see any big advantage of UCCNC having their own forum at least not at this time. Balazs (and UCCNC) is very responsive to user's assistance and improvements and the members of forum...

Correct me if I'm wrong but isn't G92.1 only recognized in Mach 3?

Lee from Vista tells me they are working on a plug-in for UCCNC and expected sometime in February.

I think the key to the problem is the reference to shockwave flash obj error. The Adobe flash bug is still causing wide spread problems. Best bet is roll back the restore point to before it was...

I use the ESS and haven't had any issues. I'm using a old Dell XP, home addition, 2gig memory. I was getting "out of data" errors at first. I fix it by slowing down the ESS transmission rate and gut...

I use Gerry's 2010 screen set... best thing for Mach 3 since sliced bread. I hope he develops a similar screen for UCCNC if so I'll be the first one on the list to order it. A soon as the UCCNC...

I posted the programmer layoff question on the Mach forum hoping that Art would respond. I think its a valid question. Well, Art finally responded but interestingly never directly answered the...

A Ethernet controller would be a great addition and one I would welcome. It would open up a whole new customer base. I work on industrial and commercial cnc systems and all use Ethernet. It has allot...

I agree with you John. The only thing keeping me from dumping Mach 3 for good is no Visa pendant plug in for UCCNC. Mach 4 roll out is a disaster and don't know why people pay $200 for the privilege...