This information is from the schematics. I checked only the A-channel of the Z-axis with the oscilloscope, but pinout, cable colors etc... is consistent with the other axis and makes sense.
My...
Type: Posts; User: lbtrs
This information is from the schematics. I checked only the A-channel of the Z-axis with the oscilloscope, but pinout, cable colors etc... is consistent with the other axis and makes sense.
My...
pinout of the CNI axis controller is:
First axis encoder: 18Z, 18D: A', A; 16Z, 16D: B', B; 14Z, 14D: Z, Z', colors are green/orange, gray/yellow and white/red. second axis encoder is 12Z-8D,...
yeah, thats possible. Did not trace the cables. The machine is very dusty, the cabinet needs another round of vacuuming.
The habit of running cables through the cabinet to the NC and the drives is...
Some pictures of the Y-axis encoder and where the cables are connected.
I have the schematics nearly completed, the NC and some E-Stop stuff are the last missing parts. Will put it on github or something when ready.
Voltage- and other measurements are planned for next...
My machine also hast GEC ALSTHOM PARVEX drives + motors, it seems the drives get feedback via separate resolver, and the NC controller gets position via Hohner optical incremental encoders. Didn't...
I recently got a similar machine, a Biesse Rover 342, and already hate the built in control. Will probably also convert to LinuxCNC. Not quite sure how to handle all the spindles and stuff though.