This may sound silly, but have you tried just swapping the X and Y axis cables?
Type: Posts; User: GerryG
This may sound silly, but have you tried just swapping the X and Y axis cables?
Yes, the legs/base on 99% of laser cutters can be taken off. The red and black Chinese built ones definitely can - I have a 60w 750*500 one in a second-floor room in my house.
I'd strip out as...
Interesting. The parameter settings do have the option for defining acceleration curves and I do remember there being a setting in there somwhere that inferred some kind of readahead functionality -...
I suspect that this may possibly have something to do with parameters 11 through 113, having trawled google for other manuals that were written by people with a better command of the language....
Hi all.
I've set up a 990MDb controller to run a 1325 router. Generally, I've ironed most of the kinks out quite well, and I'm happy enough with most of the results. Because what we're routing is...
I don't really think that biomoimicry is going to do you any great favours given that you need to meet too many criteria for a functional machine. A gantry needs to be stiff, straight, rigid. Nature...
I didn't have to change any settings in the VFD - I did the wiring I mentioned, and it worked.
As for the whole shared 5v on Pul+ and Dir+, are you just using the wires that were plugged in to the...
Hi @Eyebrow
The +24V -> +EV line was largely as a result of experimentation. It didn't seem to want to work without it, so I figured that since I had a 24V 50mA line to hand, I'd give it a shot. I...
Well, to follow up on this thread, I've successfully connected the VFD and gotten it running.
For anyone who is looking to do the same thing with the same kit, I connected the following wires to the...
It does, yes. I was just wondering whether or not it required any arcane settings to be fiddled with. VFDs are one of the more obtuse systems in my experience - there's a lot of settings for a...
Hi all - the VFD in question is a DZB312B003.7L2DK - it's on a 1325 CNC router my workplace has just bought, and it had that godawful RichAuto A11 controller attached to it. I'm fitting a 990MDb...
If its jumping, then either the speed is set too high for the job, or your belt tension is off.
What settings are you using?
Sent from my LYA-L09 using Tapatalk