Thanks all.
Thanks. This is the dialog that I could not find. Do I use this dialog for settings or the one mentioned below? They both seem have just some of the same settings for limits and...
Type: Posts; User: 1875
Thanks all.
Thanks. This is the dialog that I could not find. Do I use this dialog for settings or the one mentioned below? They both seem have just some of the same settings for limits and...
You might have a backlash issue.
On the T and E image, the lower left corner E has a dangler, so it doesn't look like it returned to the same starting point, if that is where it started.
At...
I did find this
https://blog.poscope.com/pokeys57cnc-pinout-explained/
I'm still not seeing the physical location of Pokey's pins.
Somewhere along the way I got an inkling that one of...
I bought PoKeys57CNC for my BOSS3 and Mach3 setup, and the basic configuration below was complete on a backup PC with nothing connected to the board. Motor and limit switches check OK (using o-scope...
More money is always the answer, if all the time in the world does not do it. I suspect something in a Mach file got changed. There was some kind of error dialog when I closed Mach asking to try and...
I gave up on the parallel port MPG and ordered a Pokeys57CNC. It was only frustrating because it worked a couple of times and then just stopped.
Hi, can anyone comment on why parallel port pins 2-9 indicators in the diagnostics screen are stuck high when the port is set to use them as inputs and I draw them to ground through a resistor? This...
I briefly got my MPG to work with MACH3. It interfaces through an older C22 BoB and PCI-Parallel Port card, all mounted inside the PC and uses the PC 5V supply. (one puzzle is that the series...
Does anyone know of any software that can convert raster and vector images (tiff, png, ai, eps, svg, etc. file types) to CGM file format? I've tried all of the online converters and trial version...
Open patent might address that.
I assumed they were aluminum, and even then I was a bit suspicious of the rigidity.
Dave, I appreciate the feedback and your position. I'm sure you are wanting to help specific situations. I will unfortunately just be able to provide general commentary.
Jim, that's the truth....
I was going to suggest that looks like classic backlash issue. You have rounded squares that are consistent in the X and Y axis. Mach has a backlash compensation in the drop-down menus, but best to...
Do you agree with the red bus case?
I can't help with details, but yes that is how you'd do it. I would design in some alignment pins to make the move more accurate.
I would usually look at backlash if you are not getting round holes. The jaggies not sure, maybe lots of backlash and some sticktion. How rigid is the gantry? How much can you bend it if you have a...
I always just measured my movement and then calculated from that. For example, if I set 2000 steps/mm and I programmed in 100 mm movement, and I only measure 92.03 mm movement, then I need to adjust...
I think the trend in UI development is to move away from text labeling so translation is not necessary. But a good idea is to make language lookup tables so users have the option of customizing their...
Would Tormach be considered an updgrade of a reasonably running BOSS 3 using Mach3 or LinuxCNC, as far as work capability.
I think the 770 can hold more weight, has shorter travels, and is about...
I will choke up, but am still clamping on an appreciable length of the shank. Some end mills are double end so the flutes are going to up in the collet anyway. I still try to get the bulk of the...
Use denatured alcohol or IPA as a cutting fluid. It will help keep the end mill cool and lubricate enough to mitigate chip welding. Then it should quickly evaporate and leave no residue.
I kept the original motors - forgot which ones. I've used both Mach3 and LinuxCNC. Still playing with the software part.
Mach will read the code when you load the file. If there is an error, Mach will tell you that and which line. When the code is read on loading, that is when G21 was read and switched to metric.
I...
I am using Keiling torroidal power supply, 72VDC 20 amps runs Gecko G203V drivers. Motors wired parallel.
I'd vote 3-jaw with soft pie jaws. You'll be fine once you get more support around the circumference.
Do you run the machine a lot? 3 years sounds like a long run before needing some attention, like to the gibbs as you described. Hopefully it is just a tight gibb.
I think I did them parallel. There was a long discussion from BOSS5 about this.
Lately I've been using F-engrave and it seems to have slowed down tremendously on my Win 10 machine. Just opening is taking more than 30 seconds to get the program screen. I just tried dmap2gcode and...
I was just reviewing my other post here and I mentioned the same kind of problem there, and I thought it might by my g-code viewer, Jviewer not showing the correct paths. This is the central hub...
OK, I tried using v1.62 and am seeing the same things. I get more tool lifting on a path when I set shorter sub-step lengths. I tried increasing number of pixels (1k to 2k square). I tried a simpler...