I'm not very experienced with cnc either so my help is going to be rather limited. I have only used Fusion360 for cam, so I'm not really familiar with how post processors work with other software. ...
Type: Posts; User: tannerc
I'm not very experienced with cnc either so my help is going to be rather limited. I have only used Fusion360 for cam, so I'm not really familiar with how post processors work with other software. ...
it must be programmed from the center of rotation. Mach3 has no idea where the tool tip is. It is a "dumb controller" that just follow instruction. What CAM software are you using? Im using...
Hey Jai, I would be happy to help you out as much as I can. Major changes that I have made are that I swapped out the original motion controller for a smoothstepper. I did this so that I could make...
I'm running Mach3 on a 5 axis router using a smoothstepper as the controller. I recently had an employee who used the emergency stop and then tried to resume the program. Of course it didn't signal...
I just added a second breakout board to my system to add extra outputs. I had been running on a UC100, but upgraded to ESS to get more space. The original breakout board with a built in relay and...
I'm currently using a UC100 to run my one board. Can I use another one to add a second board? or can I not run 2 of them at once?
I bought a machine running on Mach3, and it has 2 Y axis drives, that are just daisy chained together off of the breakout board. As far as software is concerned there is only 1 drive. This makes it...
So I got a 5 axis router from PDJ for our business, largely as a test unit because it is cheap, and it seemed like a small risk because the tolerance applications of what we are trying to do is very...