what is error register?
Type: Posts; User: ahmed4040
what is error register?
same results .... error 0.08mm
no drift compensation in this controller
yes same in the two direction
Dears ..
All backlash was set to "0"
and about drift comp. i do not know this function!!
is that function could be enable or disable? what its parameter number and i will see its value
Dears
We are trying to install a liner scale to X axis to improve its accuracy. (boring machine)
After editing the below parameters, we got a strange problem which is as follow:
the motor of X...
What is PC parameters?
you mean the parameters of RS232 in PC (like baud rate and ......etc)
if yes, i have entered all parameters manually.
and i still have a problem.
any other ideas?
Hello Guys
I have an urgent problem, we have a 1987 CNC machine center it model is Dahlih MCV610 equipped with controller Fanuc 10M.
I tried to backup the machine programs but unfortunately we...
photo for what?
Dears,
We have a Vision Wide CNC machine center, and it has the following alarm
Spindle servo alarm No. 750 : spindle serial link error
the spindle servo Amplifier module does not showing...
we checked the power supply output and it's ok
Hello ... what are the values of machine paameters 1320 & 1321 ??
I have exactly the same problem with same statues .... are you fix it ? how ?
resetting machine memory i got these two alarms ... the machine can't be operated in automatic mode.
i checked the way lube, spindle lube and air pressure and all of them are ok.
i don't know...
@ denmar
thanks for your reply ... if you have a photo for this sensor or this box will be so helpful .... many thanks in advance.
regards,,
dear all,
i'm new in fadal..... i have 1992 vmc4020 (CNC88HS)
every time i try to run the machine in AUTO mode, i get the message "Check Spindle Lube, Way Lube and Air Pressure" ..... i do not...
@ Denmar:
i did (hit start few times) but i got the same message .... check the lube.....
it's filled, also the air pressure is 6 bar and spindle cooler tankmis ok.
i got this message when i press Auto:
Check Spindle Lube, Way Lube and Air Pressure
every time i press AUTO, i get a message "check way lube"
what shall i do tomoperate in AUTO mode
Dear Denmar,
you mean to :
1- press MD then enter (to go to MDI mode)
2- Press PR then enter
3- Press any number for the program (EX: 342)
4- Press IN then enter
5- line in what i need then...
dear all,
i'm new in fadal..... i can move my 1992 vmc4020 (CNC88HS) in MD mode easily.
i need to type several commands in MD mode and run these command together.
EX: in Fanuc i can type as...
i need powermill post processor for fadal vmc 4020 with a cnc 88hs.
also please, what are the different between format 1 and 2 in that control?
@txcncman:
i have no manual and i could not buy them.
if you can help me in my questions, reply me here.
it can be useful for anyone else in the future.
Dear All,
i have old VMC 4020 machine (1993) i have one problems in this machine.
i got error #26 and i do not know what this error mean.
after power up the machine, i get this error, i can...
Does anyone know which parameters should be adjusted for Fanuc 0iMC with alpha-i motors when there is a vibration in X axis ?
this vibration appear at the end of X axis stroke (for b both sides)
...
@ben_heinman:
I have checked this fuse you mentioned before i post this thread and it was damaged.
now i get another fuse (working one) but the problem still found.
Screen does not work till...
Sir,
i have problem in my machining center with Fanuc oimc
the screen does not work after boot (the power is up but nothing appear on the screen)
i have checked the board behind the screen,...
i think the vibration is coming from motor & coupling side.
any help please !!!
Dear All
We have a machining center with Fanuc 0imc controller, the problem is :
When we make zero return for X axis, some vibration happens at the end of the stroke (when the X axis reach its...
Dear All,
I need the parameter file for Mazak quality center (VQC-40).
Thanks in advance