I have fixed this challenge by setting the M3 relay pin and its port to 0.
Type: Posts; User: Omorali
I have fixed this challenge by setting the M3 relay pin and its port to 0.
Hello Jerome.
I apologise for reverting this late; I just logged on.
Do you still have this requirement? It is my pleasure to share with you.
Is anyone able to kindly help me review my laser settings to discover my mistakes please? My laser settings were empty when I started up the new system.
A few months ago, I completed setting up...
I have the UC400ETH on order from Amazon and will give UCCNC a try.
Thank you once again.
Thank you so much Gerry!
I'm on it.
I have owned a KT-2514 for a while but have always been hobbled with all sorts of instability and obsolescence issues with the parallel port.
I have decided to move on to Mach4 and to connect the...
Hello everyone.
I am now quite confused; absolutely nothing has worked.
I did get movement in the Z-axis only. The motor got quite hot and I finally got very smooth movements by making...
Hello Sterob and thank you for the response.
I watched the first few training videos at the ArtSoft website yesterday for the first time ever since 2006 when I purchased my system and the...
Thank you Machinehop5 for your response.
The ECP Printer Port (LPT1) > Properties > Resources path shows the two available options listed below:
Resource Type Setting
I/O Range ...
Hello Gareth.
I am trying to solve a similar problem but just cannot find the optimization text file; are you able to share please?
Many thanks in advance.
I have checked and disabled the probe as well as the Activelow; still no change.
I am still stumped.
Thank you for the response Sterob.
A custom profile came with the machine when I purchased it and I have used the router and control box with the supplied profile before now.
The supplied...
I seriously need help folks.
I have a KT-2514 control box controlling my router and successfully engraved a design the last time in 2018. It came with a custom milling profile for me.
The Dell...