http://www.cnczone.com/gallery/data/500/dynaudioaluminumring.jpg
The material was T6061 1/4" aluminum. I used a regular wood 3/16" 2 flute endmill, no coolant, no air, just a vacuum for chip...
Type: Posts; User: silver4dracs
http://www.cnczone.com/gallery/data/500/dynaudioaluminumring.jpg
The material was T6061 1/4" aluminum. I used a regular wood 3/16" 2 flute endmill, no coolant, no air, just a vacuum for chip...
I just ran Joe's machine at 35ipm 24000RPM at .01 per pass and no problem. Cut file took 2 hours to cut. I broke a bit running at .06 per pass and 15000 rpm, the bit completely gummed up and broke.
Well I am making the plunge to the new screws. I just ordered everything and will post results.
machine is a work horse! I use it everyday
How do you set up the tool changer system in mach 3? That is the part I have yet to figure out.
Where are you purchasing this foam? I am having a heck of a time finding exactly this foam!
Hobby cnc board. hobby cnc 200 oz stepper z axis, Keiling 495 oz stepper on x and y axis.
Well guys after some frustrated nights and days I have my Joe Model 2006 runing very well. I accidently installed the gantry incorrect which made a small mis-alignment in the lead screw. This caused...
ok, so yesterday I took the entire machine apart and basically reinstalled the gantry, the bearing blocks and the lead screws. I finally have the machine working...
Joe I am unable to cure that skipping step problem. I have had to slow the machine to 40ipm and it is fairly reliable at this speed. Any other ideas? I have pulled the y lead screw off of the bearing...
The length of cable is 10'
Joe do you have the dust collector in a cad file, I need to make one i got dust everywhere. hahah
Joe nice to see your machine! BTW this is Lorenzo, you probably don't recognize my screen name. I cannot get my machine to run anything near that speed. As we discussed, I have checked the power...
Hey Joe it may be of help to post on here your mach3 settings, I know it took me a while to figure it all out.
Joe I cannot find any information on the bearing slides. I am trying to build them and have zero idea where the holes are to be drilled and at what spacing. This goes for x, y, and z axis. Please let...
I too have to say Dave that your shipment arrive way to fast. hahaahah this coming from a person who owns an operates an e commerce site. I may have to rethink using UPS.
I would be interested in purchasing your parts. Please PM me with details.