Thanks for the fast response....
Ok i guess i have to give a bit more info's.....the tool change itself is working correct the spindle in the right position and the tool goes in the taper correct....
Type: Posts; User: Prozesstech
Thanks for the fast response....
Ok i guess i have to give a bit more info's.....the tool change itself is working correct the spindle in the right position and the tool goes in the taper correct....
I got a used Cincinnati Arrow 500 and wanted to setup the tool changer. Unfortunately the machine crashes when changing tools due to the Index nose not being in the right position.
Do i have to...
Thanks Mike,
i will contact them and go from there....
Hi Mike
thanks for the answer.....i got the wheel going....something in the sub menus was on and blocking the wheel function.
Dont remember what it was but when i was going through the setups i...
Hello together,
for my Arrow 500 i would need the Y Axis linear rails with carriages new.
Does someone have a source and tips for the repair?
thanks for your help
Hello
finally got my Cincinnati Arrow 500 set up in place....
After powering up and aligning all the axis i cannot get the hand wheel to work. Tried so many buttons but do not get the Hand wheel...
Hello
finally got my Cincinnati Arrow 500 set up. Still need new linear rails for the Y axis but that's not my issue now.
After powering up and aligning all the axis i cannot get the hand wheel...
Hi....
did someone know a source to buy new linear rails and ball screws for the Cincinnati Arrow 500.
I bought the machine used and need to change the rails for the Y axis.
thanks
Klaus
Hi.... as for the Lathe please try to change 2 of your phases on the incoming power.
Normally this should not have an effect on the frequency drive but you never know. My Tool changer didn't work...
Thanks Michael.
I see you put a lot of afford in your Hobby. I have Visual Mill and Visual Turn from Mecsoft and i am very happy with the software and the support i got from them.
I do how ever not...
Yes the machine can generic g code. I work with visual turn and visual mill since years and i am absolute happy with the software and with the support.
Mecsoft was giving me more useful help then...
thanks Mike.....just what i thought.
I was not able to use my main computer for almost 3/4 year because they left me stranded and told me they fix it for the next version.
So i was wondering what...
Working with Alibre...now Geomagic for many years now and have gone though a few problems during this time.
I know nothing is perfect but im wondering what are your experiences with Support and...
Hmmmm....Do you go and buy a brand new car with an wrong configuration in the board computer and then start finding out the programming yourself?
I do not think so......
Again the controller is not...
We got the Books from Siemens with the machine.....unfortunately the machine will not operate with the sample programs from the Siemens books. I know that sounds wired but that is our dilemma.
I...
Thanks for the info....
I am using Visual Turn from Mecsoft.... With the Visual Mill from same company i had never a problem to get the post processor set up.
But this time i have massive problems...
Hello together....
In April we bought a CNC Lathe AM -1440 from Smithy.
It has a Siemens 808D Controller.
Since all these weeks we have not been able to create a post for this machine even so...
Hi....
i am stuck in the same position. Bought a CNC Lathe from Smithy with a Siemens 808 D Controller.
The machine is in my shop since 8 weeks now and so far neither Smithy nor Siemens have...
For Caprirs....
thanks for the corrections...if you have read my posts before you found that i am not from the US.....and that i admit not to be a sales pro.
A sales pro could have given me all...
thanks for your honest response....but i do not intirely agree....first..when you click on the page the product ist the first thing on top what pops up with the text distributors wanted. Well the...
So...is this real?? So many people unemployed and when i offer a job nobody wants it??
So we designed a new product...we saved the rights on it....we know our market....and all we are looking for is...
Hi together...i'm wondering if there are others what have bought the Smithy CNC924 Lathe so we can exchange our experiences of positive and negative nature.
Please contact me if you have a 924 or...
Hi together....
i'm wondering if anybody has a post for the mitutoyo millstar III controller.
If that post is already for mecsoft visual mill software that would even be better.
Please let me...