Very nice! Thank you!
Type: Posts; User: vicstransam
Very nice! Thank you!
@vicstransam
I finally managed to check the diogonal keys to see if they leave the range of travel.
See new beta version V3.26.12 at https://goo.gl/7BGkkO[/QUOTE]
It works!
.
I have a question...
You are welcome. I eagerly await the next version. Thanks again.
Thank you for the reply. I tried again testing the limits of travel and it worked as normal except if you use the corner buttons to move both axes, it will still over travel on x and y even if the...
I have been playing with the program a little bit and added a macro to the list as "Home" but the simulator model "Shapeoko 2" doesn't execute the code G28 or G91 G28 Z0 or G91 G28 X0 Y0 Z0. I am...
Thank you very much. I will try it out.
I think the only issue is that the program only uses two decimal places for metric. I'll have to look at the program again to be sure.
Here is a macro for engine turning/jeweling on a flat plate.I made it so almost everything is adjustable. I have simulated it and the concept works but may need editing for your machine.
Yes I am aware of that. The program you are talking about with the G28 is for a HAAS VF1. You can always edit to make FANUC friendly. That program was for example of using MOD.
Regarding sinha_nsit:
I still forgot to add outer brackets or delete inner brackets on the IF/AND lines. Have you edited to work on NC GUIDE?
Thanks for the heads up.
I recently needed to cut windows in a 4" tube x 1/4" thick with an end mill and as it wore, I would have to change depth in program to an unused portion of the mill. I decided to use the #3901...
Here is an alternative version of the macro in question. I did away with the IF/THEN and NC statement on one line and broke it up on separate lines.I also found some redundant settings and deleted...
Thank you. I'll check that out.
Wow, amazing work. I am playing around with this trying to learn your method. I have one question. I can't seem to find where to set units to Inch like the manual says. There is no "ID/NC" button in...
These are some macros I wrote. Use and modify however you like just be careful and toolpath them before running.
I tried to put comments everywhere to help follow the flow.
My bolt circle calculator with a little graphic help and four decimal precision with rotation of absolute start position.
It currently calculates up to 20 holes but could be extended to however many...
I have a Arduino mini pro with Atmega328p 16Mhz and would like to know if the hex file for the "Servo_Mg48_16Mhz_v3_4" would work without modification? I think the only difference is in the memory. ...
Signblazer Elements will do it. It is free, for now anyways. Download at US Cutters. Creation Pcut 630 is one of the listed cutters in SB and it is HPGL-1.
You will need the disk set for Mazatrol for your machine with the correct version such as B1 or C1, or......etc. It must match your machines firmware. You will need to get these from Mazak if you...
Set it up as a Pcut 630 HPGL in Signblazer Elements. It is set up as a cutter, not a printer. Mine works fine but I think you also must mirror the cut if I remember correctly because the plotter has...
I believe the Fusion 640T that we have uses a Windows 95 realtime kernel. I remember seeing that on the boot screen so I do believe it is different from retail Win95.
I certainly don't recommend changing anything, but it could be useful to some to help diagnose a problem by just flipping through the wealth of info. If you don't need it, don't do it.
Tried to mill a key slot on O.D. with a radius at start of key slot and the control just ignored the G02 and just milled it with no radius, so we had to program a chamfer by estimating a C start...
For anyone wanting to know,
This is how we get into debug mode on a TL25 lathe with version 6 something software.
To get into debug mode go to SETTING 7 "PARAMETER LOCK" and set to OFF.
Go to...