Search:

I think it is only name of program is incorrect... hit many times backspace button before write your brogram name.

360038

The first day of the discharge machine...

Now this Intermac Master Bevel 3500 machine has come to its end. The tool attachment mechanism inside the spindle is stuck and tool replacement is unsuccessful. The new spindle costs more than the...

I changed the floppy drive to CNC machine to this kind of USB reader.
I managed to clone boot disk to USB stick.
PC no longer could not read it at all after that but it worked in that "Liar...

I had a problem. PC crashed between machining and started to load from boot floppy disk. It did not affected cnc machining, except that the control was lost what the machine is doing.
At the same...

300246

This battery caused the problem

I got this error too: :tired:
RAM: F0034 CMOS Time Error
CPU: F0027 Unrecoverable Power-UP Error
I hope it is only battery it has changed 28.1.10 (5 years ago)
- I ordered new one..

I thry...

leveling A + B axis:
Use dial indicator to set A and B to level
277354
Use MANJ mode and jog speed 0.001 steps.
277356
Choose A level it using +- directions and same to B axel
277358

add...

Thank you mule13
It seems to solve the problem.

I would love to know what all can be adjusted from MP0. So what do they all do or mean?

I have changed the entire surface of the table,...

After movement of the X-axis in the minus direction machine remains in
the "run" mode, the machine stops and watsh dog error appears.
Movement plus direction machine goes after movement into...

sending Drawing to Bevel300 CAD/CAM:
You can copy from floppy dxf OR save directly in folder and need to "rebuild" in "FILE MANAGER"
F25
99. mashine seropoint
1. you may set new seropiont

F24...

Dos box works but must be adjusted... at least in Win XP... Now there is more than enough computers now when the support ended... And few years extra time to CNC "machine." :)

Suction have o-ring on bottom side...
Stops needs to be secured at the table in the grooves using bolts and swivel counter pieces..

Tool library at CNC
OEM -> MSG-LOG -> F24
H position
L...

Who can tell me how to get to work CAD/GAM program Master Bevel revision 3.44 in newer than Windows 89?

My old computer crashes all the time

It is a white block "key" at printer port and later...

Oh... More to it...
At CAD you need to move part to seropoint...

ELB
MOVE (no copy)
ALL (gray one)
Pres ENTER
END (blue one)
Select close to corner where you need to set sero point
Pres F5

When I put after SYS command there is option to choose if wants to set stops...
OEM
MSG-LOG
"SYS"
Complete cycle (1) "1"
NAME "program"
PCS FOR EACH STATION "1"
THIKNES "class thiknes"...

I changed the clamp to new (was wery rusty and balls was not round anymore) and adjust sensor and now everything is good and I can use 15'000r/min without any problem...

Machine is located in...

spindle spinning speed goes over 10'000 r/min I get message no tool in spindel and machine turns power off. This same problem appears shometimes lower spining speed. ("Control on" starts mashine and...

I got help from Jan and most of my problems are resolved

Only program transfer from PC to CNC still unsolved, but I think it is something wrong in windows settings.

Solved problems:
I got this...

I get brogram in NC
MSG-LOG
"SYS"
"complete cycle"
"sinngle station"
name HARJ1
Pices 1
Thickness 6
Positioning "N"
REDY FOR EXECUTION ???

activation ventil at pump was blocked.
Resolved the problem by spraying water through the input pip and I got water to pump. :rolleyes:

Hi all. The previous machine user has left and I need to get the machine back into production so any assistance would be necessary. I have problems to start work making Masrer Bevel 2300 CNC machine....