Search:

After cleaning the laser tube I found the problem, I upgraded the water pump and hoses, and since my laser tube was a little dusty, I didnt notice the inlet/outlet stickers on the tube, I followed...

I just wanted to share this, I just bought a new water pump for my laser tube and flushed the line from air bubbles, after seen a steady water flow with no bubbles I said to myself Im good to go, and...

My chiller doesnt look anything like that one, mine has a coil with fins on it like a normal evaporator and a red flow sensor.

I had air in the system and the flow sensor kept the system in alarm mode, I just forced water into the system to remove the air and it worked. I have a 40watt laser engraver that I use with a cooler...

I just bought a used 80 watt CO2 laser cutter and came with a CW-3000 water chiller, I fill up the tank and connected the IN/OUT hoses to the laser, but when I turn on the Chiller, the Alarm Light is...

I always made all my arts and cut on corel draw, separating the cuts with one color and the engravings with another color, when the art is finish I EXPORT the art as an Autocad DXF file.

On...

I have a 40watt laser engraver with this chinnese tubes.

Water temperature is very important to have full laser output.

In my case I cut 1/4" wood for my projects and I have to mantain the...

Here is a video using the optional rotary piece.(wich is tricky to setup) but once is setup works like a charm , other than that the machine is very simple to use and the LaserCut 5.3 software is...

I have this laser cutter/engraver from laserworld.
...

Thanks guys, downloading now to see how they work.

Hi guys,

Do you know where I can find Spur Type of gears files in different ratios?

Or point to a free software that I can design gears to cut on my laser machine?

Thanks

I own a china laser engraver, and the company supplied me with 3 different lenses with focal points of 45mm, 55mm and 75mm.

on my machine using the 45mm focal lens, and I found that on my lens if...

I had the same problem but I fix it raising the acrylic with almost 12mm blocks, a good exhaust blower also helps, also if youre cutting large pieces leave the plastic covering and removed from the...

I have LaserCut 5.3 and Windows 7, wich is the last one after Vista, the only way you can use the program is if you right click the lasercut icon PROPERTIES and go to COMPABILITY and check mark the...

I had a Versacamm Printer 54" and when the encoder strip gets dirty it will give you uneven lines. once it was cleaned it worked perfectly. Make sure you use the exhaust blower because when you burn...

Hi Guys,

I'm about to buy this Machine S-720 and I was wondering how good is it?

I'm a graphic designer and Corel Draw is one of the best programs I know, I cant wait to start designing, but I...