I have Chinese 6040 router working under VFD control
But the spindle will not work at full speed unless I
Turn the pot dial to manual. I know this
Is not a mechanical issue because it happened...
Type: Posts; User: oneusageek
I have Chinese 6040 router working under VFD control
But the spindle will not work at full speed unless I
Turn the pot dial to manual. I know this
Is not a mechanical issue because it happened...
I checked the settings and changed a few things. Everything is now as it should be. But there is still a problem. Spindle speed is still really low when under vfd control. Putting vfd on manual...
I used the VFD settings in this thread some time back to get my router up and running successfully, but now I am having an issue. I ran a project the other day and everything went great, but today, I...
Well, CHIMERA1960, I have been watching tons of youtube videos, been reading, and have decided I am not going to be able to handle installing a touch plate. I found a guy from one of the Facebook CNC...
My router uses the parallel port connection, so I am afraid I can't even guess what the issue with your USB using unit may be. At this point, I am not going to know enough about Gcode to be able to...
Wow, even with the videos on youtube, I think I can forget about being able to do this, but I did find one video that showed the guy using an auto-setter for the steps per inch on mach3, so I did...
Just wondering if you could once again offer me some help with this unit. I want to be sure I have the steps per done right, and since it seems you have the same machine I have, would you be willing...
I absolutely did get that manual, and will definitely be printing it out, as well as many other things regarding the Chinese router setup. I want hard copies of the manual from you and printouts of...
CHIMERA1960 and GMUNGAS, just wanted to say that you are both awesome individuals! Thanks to the efforts of both of you, my Chinese router spindle now runs through Mach3, and I am ecstatic. Thank you...
CHIMERA1960, I do not know how to find the translated manual that you have posted. Any possibility that you could send it to me at the email address that I have already sent to you by private...
OK, so I have tried this, but did not get very far. I got to the end of step 1, where I reset the vfd to factory defaults. The readout said the word LOAD, and flashed a few other things pretty...
Here are the settings I am referring to.......................
1) Reset the VFD to factory settings
a) Set D001 to 1 (may be able to skip this step)
b) Set D176 to 1 and press Func (this resets...
Hi, hoping you can tell me if these settings are proper for my router. I have a unit like you described in the beginning of your post, but am unsure if my spindle is 400hz. Can you tell me how to...
My name is Jeff, and I am new to CNC. I'm sure I'm going to learn a lot here, it has been a real struggle to get as far as I have. I have a Chinese 6040 CNC router from China, (the beige ones with a...