I have doubles of some manuals, let me know if you'd be interested in having me send them from New Zealand
Type: Posts; User: NZ_Jase
I have doubles of some manuals, let me know if you'd be interested in having me send them from New Zealand
Hi,
Yes, I have for LB15II-M
Jase.
Bmoz90 - can you please contact me re spares?
After a power supply, CRPBII board and possibly some servo drives as spares
Jase +64(21)575888 or [email protected]
Hi guys,
Looking to part out a Mazak 2-L lathe
Currently complete and working
12" 3-jaw hydraulic chuck
All electronics avail, plus one or 2 spares of every Fanuc board, plus boxes of new Fanuc...
Could be very interested. Can I have contact details, or email me [email protected]
Cheers, Jase.
Hi Jay,
I think I may have just acquired a Mazak QT lathe with an M2 or M32 control. Is this still available?
Jase.
There is a button pushing procedure to clear that. Having the power on charges the 3 sets of batteries. You may need to reload the parameters if they got that flat. Let me know if you want shots of...
I was in your shoes a few years back, used Codeshark Lite sucessfully until I got CAM software with editor/DNC intgrated. There are a couple of others around (that I haven't used) but can't remember...
Cheers. My control is the machining centre version of yours. Oi-m. The LCD and monitor control PCB will be very similar. I found a new LCD that is a direct replacement but with better specs (viewing...
Hi, did you solve this problem? I have something similar where the display is copied 4 times over itself, so it looks like columns down the display, with a whole bunch of flickering. I can't cure it,...
:banana::banana::banana:
Beat you to him! I emailed John at RYM for BTR pricing and he put me in touch with Roger yesterday. Had a chat to him and got a handle on what is available at what cost....
Hi all,
If anyone has one of these BTR units can you please let me know what the DIP switch settings do and what Comm settings are successful please?
Cheers, Jase.
Thanks Dan,
I changed the TV bit in the SET page to 0, solved that alarm.
My Set page is now all 0's apart from ISO being 1.
What do the others do?
Now I have a TH alarm and the buffer LED...
Hi guys,
I can see light at the end of what has been a long but rewarding tunnel!
My Mazak that I bought as a project is going, after numerous issues with boards, wiring, blocked lube systems...
Hi Dave,
Just saw your post on the retrofit plan. Not sure how far you've got, but I started to go down this track with a Mazak 2L I have. The machine had multiple issues which I have now got on...
Just to finish this off on the off-chance someone has the same problem then the thread is kind of complete.
I never got to the bottom of the SoftALM LED coming on. The bad EEPROM idea had some...
Hey, there's a couple of options. See similar posts on this forum:
http://www.cnczone.com/forums/forumdisplay.php?f=380
J
Hi Dan,
Do you know off the top of your head how to dump all the parameters? I'll have a scout in the manual later today if there is a procedure, otherwise I guess I just pull the battery off?
...
Would the Machine Lock switch result in this problem? I'm pretty sure my ML switch inhibits movement in manual jog/rapid too come to think of it, but there could be diagnostic bits you can quickly...
Thanks for the info. I guess the RAM is the bunch of IC's up the top right for the A board? Might reseat them and check again.
It was running fine for a few hours before a brief shut down (noisy...
Hi guys,
Just wondering if anyone can tell me why my Mazak has the SoftALM led lit on the A board? I have looked thru the Maintenance Manual and it has no troubleshooting info in relation to this....
Hi,
I've been reading these forums for a bit, but this is my first post.
A few months ago I emailed Rufi and made enquiries as to the suitability of using one of these MCs to replace the ageing...
Jevs, are you still around? Did you manage to get all of this working as planned? Or does anyone else know how he got on?
I have a Mazak Dynaturn lathe with a 5T controller that I'm having lots of...
Hi,
I had this issue on a 5T, X would move only towards the operator, Z was fine. It turned out to be a faulty A-PC03 IC on the A board.
Good luck, Jase.