pd072 was set to 400, I set pd073 to 120, now Ican't get it back to display the rpms.
Type: Posts; User: woodworker2
pd072 was set to 400, I set pd073 to 120, now Ican't get it back to display the rpms.
Yes the jumper was moved.
Hi I have a Huanyang VFD 110V air cooled 1.5KW spindle with a 400hz and 24000 rpm. Out of the box it seems that all of the appropriate settings are preset correctly. I wired it up and it came on...
Cut through the mahogany body today, every thing went well. It was hot in Tennessee today, the sanyo denki fans seemed to keep everything in my new controller cool, no heating issues.
I received my unit thursday and it looks great. Set up was a breeze, about 15 minutes. I hooked it up to my air cooled spindle and VFD last night and my router is running great. I gave it a test...
Hello all, I don't know if any of you have seen this controller unit, but I took the plunge and ordered one. I should have it in a few days. Just finished my new machine and thought I would save some...
Joe, if you don't mind me asking, how long did it take to receive your machine and was there any quality issues on the steel rails? I have left 3 messages and sent two emails just trying to get a...
We run 3 plasma machines at work and they are historically faster than waterjets. We burn a lot of 96" x 240", 72" x 240", and sometimes 96" x 480". I push my guys to get 5.5 to 7 hours of burn time...
We use Pronest to run our high definition plasma machines at work. It is made by Hypertherm. They have excellent tech support. I would call them and tell them what is going on. You could have an...
Need this gone, make an offer!!!!!!
Thanks for the input Pete. I am confident I can handle the driver wiring, the breakout boards are some what limited on wiring info. I have already figured layout and power wiring for both options. I...
Thanks for the advise. Is there a big difference between a digital DSP driver and a digital bipolar chopping driver?
Question, I have a 4' x 4' router I just finished building, and for $650 I can get 4 individual new 32bit DSP DM556 digital drivers, breakout board, 48V power supplies, housing case, fans,...
Thank you I appreciate the response
@wizard, table cutting dimensions 24" x 36". for the body, a 20" x 21" is plenty, but the way I plan on holding and mounting the body wood I need about 21" x 24" of table space. I have what I ...
Typical gantry driven from a single lead screw (3 axis), or dual lead screws.
I am building a small cnc router with a working table size of 24" x 36". I build guitars and need to get them running on a cnc. On this size, should I go 3 axis or 4 axis?
Appreciate your...
I need to get this sold, will sell for $275.00 shipped! Continential US only!
This is still in the original shipping boxes. Will sell for $325.00 shipping included at that price, continental US only!
I have a brand new Xylotex 3 axis controller unit that came with 3- 269oz motors for sale. All original cables, DB 25 connector, and setup instructions come with it. I bought it new in 2010 when I...
Anti Backlash Nut | eBay
New unused from Dumpster CNC, anti backlash nuts. Auction is for all 3 pieces. Greatly reduced price compared to what they sell for new.
$39 +$8 shipping.
Shaft Coupler 1 2" 10 2 Start Couplers | eBay
These are brand new and unused. $36.00 for the set of 3 plus $8 for shipping.
Thank you, I have looked at Hiwin and THK, and I can't give you the model numbers, but I did make sure that in the descriptions, that they could be mounted in a vertical application.
Hi all, I am building a new cnc router with a table cutting size of 42" x 30".
I am planning on using 80/20 extrusion, and I am going to use some linear rails, either Hiwin or THK. Do any of you...
Looking to buy some in bulk. You can respond with a PM.
Thank you Macgemby, That is the response I was looking for. Do you have your two drives mounted on an open board or enclosed in a case?
HI all, I am building a 3 axis cnc router which is just about complete, I am trying to decide which drive board to use with either 270 oz or 300 oz stepper motors. The 3 I am looking at are: Xylotex...
I buy and cut quite a bit of HDPE, and the supplier I buy fromn has always recomended to me to use a single flute bit and run it between 45 to 65 ipms. The single flute should keep the acrylic from...
I have been looking at some of the same material for several different reasons, but here is some info that I have discovered for the better this week: uhmw is very soft material, and is hard to...
Hi, I have a small cnc router that I am currently using, (mostly for drilling purposes), and I am considering building a larger 5'x9' machine to cut plywood and expensive veneered sheetgoods on,...