Hi,
I had the same problem a while ago with Mikron+ tnc315. I cleaned the contact surfaces from dust and other s***, and it helped.
Osmo P
Type: Posts; User: Oopee
Hi,
I had the same problem a while ago with Mikron+ tnc315. I cleaned the contact surfaces from dust and other s***, and it helped.
Osmo P
Hello,
#1: in programming and editing: Cycle Def> GOTO>10>enter (or you can use the arrowkeys to scroll the list which appears after pushing Cycle def) > set the desired value, increment or...
Huh,
+400 views, and no comments?:confused:
Unless if they are to busy with repair and service....
Done and out
/op
Doesn´t seem to be widely used maschines....
No problem nbjs,
Was it MP7530? (in i530 it is, 426 I was not sure)
Yup, that setting was to enable/disable the use of M19.
Called a friend here (questions about Heidenhain he cannot find answer are very rare) and he said that the kinematics must be defined in...
Hi,
There is a setting witch have something to do with rotating machining planes,if it helps , I´m not sure, I´ll look at it on monday.
"Rotary table coordinates missing"--sounds strange though,...
[QUOTE=nbjs;224130] I allways get some errors.
Exactly,what kind ? (error messages?) Is the fourth axis activated in machine parameters?
Osmo P
Just to bring this up again, if there were somebody who uses these machines after all:)
Any users?? Eagle lathes are sold by Dugard in UK.
Regs OP
Hi all,
I´m looking for opinions about Eagle 200HT CNC-lathe. I think the same machine is sold somewhere under name Focus FCL-200
All comments apriciated.
Osmo P
HI,
Send me an e-mail,ill reply to it with mp:s
Heips Machineguy,
I have a parameter list for TNC355 somewhere on one of my computers. I can dig it up for you on monday if you wish.You coul put them in via R232- port. although its from a Mikron...
Thanks Krisz,
Looks pretty good,(the softw) I will download the demo when I know that I´ll
have the time to play with it. What are the maintenance costs/policy?
Osmo P
Some comments can be found at http://forum.delcam.com/viewtopic.php?t=123 and if you do a search here at CNCzone you should find some posts regarding Powermill.
Not really, it does wery good...
Hi Alec,
I live in Finland and I´m making molds and tools as well. (But not even nearly as demanding as this customer of yours you referred :) ).
I´m using PowerMIll to generate toolpaths and I´m...
Hi,
By lead in or out I mean how the tool is taken to the surface or area to be machined. Is there any options to add arcs or ramping instead of plunging, to avoid "kissing marks"?
By links I mean...
Hi,
How about leads in/out and links? I didn´t find any info about them from your links and they didn´t show up at the image gallery either.
Osmo P
Thanks for the reply Alec,
As I said in my post I was just curious if someone uses or have evaluated the software and how he/she felt (spelling?) about it. I took a quick look at the prochures and...
Send you an e-mail
Osmo P
If Tulak uses the tool library at the machine, there is no need for tool definition. Just setting the L and R values in the tool library for that tool is needed. Or if you have a tool measuring probe...
Hi,
It seems that your postprocessorfile needs some editing, but what to change there, I don´t have a clue. You could maybe search something like: "define block" and after that something which...
Hi Tulak,
I haven´t used 430, but I think the code looks like same as TNC355 and 426 which I have here.
Here is some code made for 355, some lines erased from the middle..:)
AS which style to...
Hi,
Select the geometry,go and right-click "Feature-sets"(in Explorer at leftside of screen) and click "Make feature set" (I have a Finnish (partly) vers. of PM, so the commands might not be exactly...
Hi Dan, just saw this post
I use PM mostly fo3D, but I have noticed the same thing (even with earlier versions too ;) )
Have you found any explanation?
I have noticed that "use pairs" command...
Hi Gabor,
I don´t know about postprocesing, but you can divide an active toolpath by angle,direction,lenght and time and make individual
programs using those resulting toolpaths. You can also limit...
http://www.freecad.com/
Anyone tried/using PC 3.2 CAD/CAM Software?
http://cnczone.com/links.php?s=&action=viewlink&linkid=80
Just curious :)
Osmo P
Congratulations Dan an Merry Christmas to all!
Osmo P
Ps.
Per 1/2 year would have been correct:rolleyes: