Looking to have the following part created on a lathe. The measurements are in the photo. I am sure there will be questions as I am not sure all the information needed to give a quote is in here.
...
Type: Posts; User: mrbaseball
Looking to have the following part created on a lathe. The measurements are in the photo. I am sure there will be questions as I am not sure all the information needed to give a quote is in here.
...
Here is where I bought mine for use with my CNC Router electronics.
GDP06-R: JAMECO VALUEPRO: Interconnects
Here are some additional photos of the progress on my machine, I spent most of today working on the Y axis and the Z axis. These photos show some of the details. I am using UHMW for the bearing...
Looks very Nice!! What are you using for an Autopilot? I am using an Ardupilot Mega...
Here are some photos of the gantry - I apologize for the blurriness and the poor quality, I had to take these with my Ipod instead of my Canon 40D :( I will post some additional photos once I get...
After many, many years on the forums I have finally started building my first CNC router.
The router footprint will be 24" x 36". The cutting area will be determined once I start the assembly....
I am planning on using a 24v 15amp 350w power supply for the hobbycnc board like the ones you have posted a link to, what did you upgrade to when you outgrew yours?
Yes, Gerry has been very helpful as he cut my gantry sides and backing several years ago and I am just now getting around to actually finishing what I started!!
I was originally on track to...
I'm only looking to cut hobby stuff right off the bat, i.e. - balsa, light 1/8 plywood and such. The acme rod I have is 1/2 x 10 not sure of the start.
this has been an ongoing project for the...
I am building a DIY Router that uses acme rods for movement and the overall size is roughly 36 inches long, 24 inches wide with roughly 3-4 inches depth, I was going to purchase 166oz-in stepper...
I'm planning on purchasing a cnc package from dave at hobbycnc in the near future but in the mean time I want to setup my router drilled for the various parts. I am wondering if anyone has technical...
Here is what I am shooting for, forgive my drawings skills, I just starting using Google Sketchup.
I am currently designing my cnc router and need some assistance in cutting out the 2 sides of the gantries. I drew the gantries in Google sketch and am looking for someone that has a router that can...
The pieces were cut and drilled, but very sloppy. So the pieces that were cut in half to create two separate pieces are not square. There are four(4) blocks that are roughly 3 x 3 inches and are 1.5...
I have some pieces of UHMW that I had another member cut and drill, however when I recieved them, they were not square by any means. I need someone that can mill the ends and sides. I need the...
I do have autocad 2006 trial, but I don't know enough yet to be worthwhile:( I have been poking around with it a bit here and there. I have been following some tutorials but none have been helpful...
I have this autocad 2000 file that I converted over from illustrator. I cannot figure out how to change the dimensions of the file so that I can print out this cnc gantry side to trace and cut on the...
I'm using thre hobbycnc 3 axis board so I will setup the limit switches with this
anyone???
I'm at the stage in acquiring parts for my machine and need to know how many limit/home switches are needed for a 3 axis router. Am I right in assuming that I need 3 home switches and 3 limit...
Hello everyone,
I'm making this one revision to the jgro router design for my own use. It is for the y axis gantry. I got the idea mostly from Anoels build photos. I have this drawing in...
First is this even possible, and second wat are your suggestions?? I don't need a huge swing or length, I will use it for regular hobby use. A 7x12 or even a 9 x whatever would be fine. I was looking...
Ahh, Thanks for the dimensions:) How does it work for you?? Do you use it on a CNC router??
I've been lookingfor the dimensions for the rotozip to size my cnc router accordingly so that it can be used down the road if needed. However I can't find the dimensions anywhere. Does anyone know...
What is the benefit of pre-tensioning the lead screws?? Is this absolutely necessary??
thanks
OK, thanks, where are some good sources for thrust bearings?? Do I need two thrust bearings per acme rod?? X? Y? Z? or just one??? Do they make flange mount thrust bearings??
Will these work??...
Yes I have 1/2-10 acme rod. I want to machine it down to 1/4 inch becuase the steppers are taht size and I have the bearings that I aksed about in the last thread.
I just received some 2 hole flange bearings that are from igus. They have a 1/4 inch hole and I wanted to turn down my acme screw ends to fit these bearings. WIll this work? I plan to use one on each...
Here u what I received an was planing on using. I was goign to place two on each axis to support and enable the acme screw rods.
http://www.igus.com/igubal/sizepresent.asp?p=EFOI
EFOI-04
...
How do folks get away by using NO bearings on their machines?? i.e.- Jgro style machines??