Hello Friends,
Does anyone knows any free software in which we can check 4 Axis simulation? (I tried Nc plotter & CNC simulator but no results)
Or If anyone has a license copy of Turnmill...
Type: Posts; User: Ashish B
Hello Friends,
Does anyone knows any free software in which we can check 4 Axis simulation? (I tried Nc plotter & CNC simulator but no results)
Or If anyone has a license copy of Turnmill...
Hey,
Can you describe what error is popping out ?
And have you entered M98 & M99 codes properly ?
Kindly elaborate
P.S - Main & Subprograms are supposed to run only when they are...
Hello Guys,
I have heard about the PART ALIGNMENT module or option (which now comes directly along with any CAM Software) on CNC Milling Machine. We all machinist have to find the hole centre...
Hi everyone,
Glad to be here
We are manufacturing a component named as Flange (Refer Image 1). The customer requirement is that COMPONENT parallelism should be within 0.015 mm (15 microns). The...
Hi Everyone,
Glad to be here
We are manufacturing a component named as Flange (Refer Image 1). The customer requirement is that COMPONENT parallelism should be within 0.012 mm (12 microns)....
I will surely reply on this trial. Give me some time
But how to type # or = character on the control
As all can see in the attachment, I type the buttons below DELETE button, then is it not getting typed.
That # character is only typed when I...
How to check whether the machine supports Macro A or Macro B on my old machine?
Hey it that really possible? If I transfer that codes via RS232C port then can I really run the program on older machine.
Hi,
I just wrote a macro Program on Fanuc Oi mate - TD control. The program works fine on Fanuc Oi Mate control.
I also want to implement the same on my older machines which have Fanuc O T...
Hello Samu,
Thanks for your wonderful reply. I had really lost hopes of fixing this, but your reply has once again triggered me to make this happen.
But I am having certain problems after...
Guys, please let me know the variable which tracks the spindle speed on a typical fanuc control..
I thought in this way -
If during a collision, the spindle speed decreases & if the spindle...
But i have found a variable no. 410 (it is a variable which is found after browsing the DIAGNOSTIC screen which continuously displays the spindle load on a Fanuc O-it series system).
Also i...
Hi Guys,
We are having many machine accidents (due to wrong offset or reverse part clamping). Hence i need to build up a MACRO program such that -
It will detect spindle load (at a...
I was also thinking about writing a MACRO program for it. But then realized that the outcome of that macro will be similar. I mean even if we write a MACRO program, then too it will do machine...
I think that there may be some parameter (which controls the machine axis) & when we say G68 X0.0 Y0.0 R35.0, the parameter is changed and hence the machine axis is rotated accordingly.
But the...
Hello,
If we command G68, then it rotates the coordinate system & the Machine movement is done accordingly.
I wanted to ask that is there an option of changing the X & Y movement of the...
Thanks all for your valueable suggestions
Hello,
I want to drill a counterbore in a carbide material. How should i do that ? Should i do EDM or something else ?
Thanks
Ashish
Firstly you need to setup the COMPUTER & CNC Machine to be able to EXCHANGE DATA.
Please mention your email ID, so that i can mail you that document.
Thanks
Ashish
Hi,
Every CAM software outputize the NC Program through various techniques. If you try Delcam Powermill, then you have the following output options -
1. FIT ARCS
2. TOLERANCE ARCS
3....
Hi,
If your machine doesn't supports G68 command, then you can download the evaluation version of COMPUTER AIDED SETUP Software. This software will rotate the NC Programs. For more details,...
I hope you need to do some exercise of G02/G03 command.
Check it out here -
http://http://www.cnccookbook.com/CCCNCGCodeArcsG02G03.htm
Hello,
The following things decide the surface finish of any part -
1. Clamping Rigidity
2. Insert grade / Insert material
3. Tool clamping rigidity
4. Feed/Speed
5. Stock kept for...
Hi,
Try by using Txxxx command. For e.g.,
T0123 where,
01 - Tool Number
23 - Offset Number
Hi,
A other method of setting Work Offset ( G54 ) is through Macro Programming. Type the following program & run -
o1234;
#101=...... (the x axis offset value);
#102=...... (the y axis...
Hi jeffrey,
Thank you very much for helping. :D
Ashish
Hi,
You will find a attached drg of a bush having a eccentric hole.
Can anyone tell me that how much eccentric the ID is ? ( Identified by red colour ).
Thanks
Ashish
I think that a great way to use a macro program.
Suppose you are at X200.0 Z-130.0 in the previous cycle.
You should place a code in the NC Program ( this is the position at which you want to...
Thanks
I was really searching for the DATE & TIME SETTING since last 1 month.
I really thank you for helping me out.:banana:
Ashish