I bought this machine surplus. It has a jada automation control board. It runs a software called tenwins automation on windows 7. Any body have manuals or schematics? Even a picture of the inside of...
Type: Posts; User: lowpull
I bought this machine surplus. It has a jada automation control board. It runs a software called tenwins automation on windows 7. Any body have manuals or schematics? Even a picture of the inside of...
Still needing help on your dynacnc table?
the impression that I get is that it is not a high volume issue. You can print up a bunch of serial number stencils at one time. It takes, what 5 minutes to electroengrave the sn. Many knifemakers...
With no depth requirements I would suggest investigating electrochemical etching. Such as Electrochemical Marking, Electromarking, Metal Marking Devices or etchomatic.
After you put the linear bearings on them you are only going to get what 10 to 12 inches of travel? If I didnt hate ebay so much I would try to sell them on there. I guess I will keep a set for a...
Ive been having problems with my laser for a while it puts out just a little beam just strong enough to discolor wood. I put a meter on it and get 4 mililamps no matter what the input control voltage...
248912 Here is a picture of said toe stumpers. Anybody got an idea of what these would be good for?
NB Nippon Bearing SWK12GUU 3/4 inch Flanged linear rod bearing This is for 4 of these bearings New Old Stock.
NB Nippon Bearing SWK12GUU 3 4 inch Flanged Linear Rod Bearing Quantity 4 | eBay.
They...
I go to auctions and get some of my tinkering components. Keep some and sell some to offset the costs. But I bought some boxed Thompson linear rod. Instead of One long rod. I got 15 size 24 (1 1/2...
try swapping gecko's between z and x or y and see if the problem follows the gecko.
A friend of mine goes to government auctions and came across this. He knows that I have cnc equipment. Its not anything I could use so I thought I would pass along his link.
Immersion Corporation...
On my machine when they built it they pulled down the gantry to tight. I disconnected all the steppers and such and tried to move the gantry by hand and it still bound. So I blocked up the gantry ....
I keep the good electrodes to reuse later
You really need the floating head. they are not hard to make. How else will you know where the top of the metal is when you go to cut on a warped piece. It also saves parts if you drive the head down...
If this was all working before the computer change, then I suspect mach 3 settings or possibly buggy computer ports etc
1.visually check wiring and connections on table. unplug and plug connections
2 swap the z and x or y geckos and see if it is a gecko issue.
3 Swap the x and z plugs on the table you might need...
The 10k includes all of the below. (Approx 47x 35 x 10 table size)
rabbit 1290se with 80 watt laser. rotary attachment, photograv, refrigerated chiller, air pump, exaust fan. It also included...
Same size vs same size is not a 10 percent difference in price, or a 20 percent difference in price. its 400 to 800 percent difference in price. It was a choice of buying chinese or not buying at...
I had forgotten all about this thread, after letting ditco know how I felt about tyler back then, they offered to update the hand controller that would then update the dyna4000 controller. Which I...
what control are you running? mp1000, 4000, 6000, 7000 ?
Yes, they went out of business.
So we need to know what machine do you have? servo or stepper.
what control does it have?
Dyna1000
Dyna4000
Dyna6000
or the dyna7000
what version of mach3 and...
Ive got one. 100 plus shipping
dynacnc used tom caudles (candcnc.com) mp1000, another company's dyna4000, even another co. dyna6000 and then the 7000.
so it depends what you have. I have the dyna4000 stuff. ( even though I round...
500 plus shipping. It has the updated programing in the hand control, but I haven't hooked it back up so it could dump it to the main controller. Didn't see tearing down my working setup just to do...
Vermont, I dont have a dog in this fight, but it seems you are like a trapped dog, biting everyone who gets close to you. When the thread first started I had some sympathy for you, but after your...
Yes they are out of business. But if someone needs a dyna4000 controller I happen to have one I am not using.
When I am drawing and I want a pierce to drill out, I make it a perfect circle between .2 and .5 diameter. When I bring it into sheetcam I make sure the use points for drilling is checked on the...
I use the drill/pierce function in sheetcam. I then use a regular drill bit to drill the piercings out on the drill press. I havent broken a drill bit yet.
But your software is inserting errors into the files. You might not be able to smooth curves where there are no curves, but you can sure make jagged lines where there were no lines before. It would...
You made it pretty clear that you were not interested in my problem. You said my art has too many nodes in it. Said auto trace software puts too many points out there. Suggested hand tracing....