Search:

Software is LASERCAD whitout dongle...

You can connect the DSP to the computer via USB cable or RJ45 network .... Possibility to install on all computers in your company because you do not need...

Good morning .... I put in my a TROCEN AWC708-C and I am very satisfied .... I bought in China and I have support with the company through Skype ... I was well attended and I recommend .... If you...

Out of curiosity what is the drive of the shaft that is giving this problem?

Enviado de meu ASUS_Z00AD usando Tapatalk

This is the TROCEN website, download the firmware of your model and the latest version of LASERCAD .....

Motion Control is Trocen - Firmware Update Package - Firmware Update Package



Enviado...

I had this same problem with my AWC708-C PLUS ... After I updated the firmware and use with the latest version of LASERCAD software, the problem disappeared .....

Enviado de meu ASUS_Z00AD usando...

Visible LASER --- SPT Laser T series laser tube - YouTube


Enviado de meu ASUS_Z00AD usando Tapatalk

Hi, Emily.

Very interesting this new system ... have any videos of it working? When will it be for sale? Will it be for all models of tubes gives SPT or a specific one?

Enviado de meu...

Does anyone have LaserWorks 6.00.44 to make downloadable ...


Thank you very much

I work at 20° and 24°

Enviado de meu ASUS_Z00AD usando Tapatalk

Download the updated version of LASERCAD here ..... Works seamlessly on Windows 10 .....

http://www.sztrocen.com/download/software?download=11:lasercad-v7-68b

Enviado de meu ASUS_Z00AD usando...

all laser tubes have the lens in the output ... and you should clean it from time to time ... it is on the negative side of the tube ....

Enviado de meu ASUS_Z00AD usando Tapatalk

is the lens that sits at the edge of the output laser tube equal in the image below...

https://imgur.com/7F1ZhNR.jpg

Enviado de meu ASUS_Z00AD usando Tapatalk

I had misunderstood your problem ... More laser cut all that way in pulses ... What could be exacerbating this problem can be fouxas belt or very stretched ... poorly fitted wheels .... He checked it...

I recommend it for security use TH, switch the blue wire to the TH source of energy and change in the parent menu to high level ... For being in any micro TL interference connection can make the...

Where u got? Post pictures of the connections to the power source and the laser output on the controller. In order to check.

Enviado de meu ASUS_Z00AD usando Tapatalk

Probably has to do how you connect the TTL to the power source ... If u called in TH will the secret of the parent menu is check how it is configured there ... TH High Level is called in TL has to be...

I am in Brazil and I have a Chinese laser machine and other brand accompany the CNCZONE a long time and the reports and depositions THUNDERLASER has a great reputation both in the quality of their...

The lens you are using is how many millimeters of focus? To cut 6mm is recommended to use a lens of 101,6mm focu that there better cut thicker materials and lens 50.8 to recording and cutting thinner...

Hi ... You can send me also the files to my email? Follow my email - [email protected]

Thanks

Enviado de meu ASUS_Z00AD usando Tapatalk

I use a AWC708C and works perfectly. The LASERCAD software that controls it has plugin to install Corel and there you have direct orders in the court file for LASERCAD and from there you define the...

What is the power of laser tube? This temperature is too high, you should try to work at least 24 ° C ...

Enviado de meu ASUS_Z00AD usando Tapatalk

Very good ...
Could you post some pictures of how was this repair for us to observe and describe best brands and models of products used in the repair and so quite help the board staff ...
Hug and...

Check if the ammeter power is falling on it, if the problem is with certainty the power supply ....

Now remains constant power on the ammeter during the cutting period there most likely be the...

Of course you can ... Only you position your rotary axis in the opposite feeling of what is currently using ... and test reversing the movement of the laser pen ...

Of course can... Only you place your rotary axis in the feeling inverse of what is currently using... and test reversing onmovimentonda pen laser...

Try to reverse the movement of the pen ... If you are recording on the X axis, switch to move the Y and test ... and see the results ....

que cambió la fuente de alimentación del tubo?

Good day

Does anyone have this project to share?

I found it very interesting ...

Thanks

http://imgur.com/ufwfvs4.jpg

This spindle has 14,000 hours worked or life in total?

Take a picture of how it is done connecting the controller cables to the Power suply so we can see ....

https://imgur.com/J8hJybP.jpg