Is the issue resolved. Send me a mail at [email protected] if you need any help on setting up of the encoder
Type: Posts; User: navinbhas
Is the issue resolved. Send me a mail at [email protected] if you need any help on setting up of the encoder
Whts the 7seg led status on y drive?
Is the drive battery voltage okay?
If yes the backup the drive data.. Format and initialize the drive.. Reload the data and then try abs pos setup
Any alarms occur on the machine other than emergency.. Whats the 7seg status on all drives
If you still require, send me a mail at [email protected].
F0 is for plc access. The access is restricted with parameter
Could you share an image of the error
May occur due to a faulty hard disk or corruption of hdd data
Hi can you list out the full detailed alarm or give ua a pic of the screen
Please list out the LED status on all the NC cards and drive
Whats the led status on all the nc cards and drives?
Meldas 64-B, 64S, there is no add on memory feature. There is cassette HR437 which helps, with add on memory but you need to check with Mitsubishi for the same.
DNC parameters you would get in the...
The status you mentioned is that on spindle drive unit. 37 can occur due to multiple issues
1) if power supply drive is not working
2) If the communication cable is faulty.
3) If the...
Well can you confirm the led status on the power supply drive. MDS-CH-CV-*** DRIVE
There should be a data along with the alarm .
42 SPINDLE PARAMETER MALFUNCTION (****,************,***). Check in the diagnosis screen.
Also please check the 7 segment led status on power supply...
please check nd share the alarm code blinking on the drive unit.
please share the complete alarm detail.(full line description from diagnosis alarms)
Could you list the full alarm description along with codes mentioned in brackets. Else please check the alarm details in MR-J2 software, or please check the alarm coder on 7-segment display on the...
You would have to delete the complete tool data and insert once again manually. This can happen if the tool dat is corrupted
This is related to memory error. Try initializing the drive unit. If it doesn't work then the drive control card needs to be repaired
Sorry for the delay as I was not able to access the account during vacation.
Ok so if you need to connect the power supply unit to servo drive unit, you have have to change the ptyp parameter in...
Mazak has a tool which would help to take the backup to a pendrive. Its quite costly.
Mazatrol 640 used MDS-CH series of drive units. If you could share the details of machine model, I can give you the list of drive units for the machine
Please check the battery voltage. If its been down for a year, then the data would have been corrupted.
Hi cinman
Could you confirm if the QT6G is with a Mitsubishi M64 controller.
If yes, at the time of alarm occurrence, what is the status of 7 seg LED on the controller. Also please check if...
Please share more details about the controller .
The software and parameter for standard M700 is different from Citizen M700.
However please check the below list of parameter...
https://www.cnczone.com/forums/attachment.php?attachmentid=419262&stc=1
Kindly share the complete alarm description to identify the exact cause. Or you may check the alarm code appearing on the turret drive unit and share it, so that proper guidance can be given
DO you want manuals related to M70 or for Marposs measuring system?