Hi, Ugali, 4.1.2.3 already the highest version of this series.
Type: Posts; User: Melody-gweike
Hi, Ugali, 4.1.2.3 already the highest version of this series.
HI, Ugali,
4.1.2.3 card is very old version before 2010 year. It can not be upgraded to 4.3.1.5 because clips inside are different.
While 4.1.2.5 card can upgrade.
Bruce, i am glad your machine works well again now!
Power, Speed, Thickness suggestion for chinese laser as attachment ~
News today.-- Because of " equipments improvement reason", Reci will stop supplying tubes for two months. That is to the whole market. Customers who need the machines in urgent can choose other...
HI, If you have problems with your 6515 firmware, then you can use these two files. Also they can be used for downgrading from other version.
Step 1:Copy the updated firmware data to the root...
A 3-year-old post! Time flies like a stream. Hope everyone here is well.
6. Test if whole machine no electric
Switch test if whole machine no electric - YouTube
5. To find out whether it is tube problem or psu problem
Laser tube problem or Laser powersupply problem - YouTube
Hi, all,
"Freeze" problem is very common for machines with 6525 cards.
Here is the soloution. Many customers have successed to make the machine working again with that.
Please check the patch...
4. New machine Setting up guide
G.Weike USB mode laser manual video - YouTube
3. Signal Test of CW series Chiller
Signal Test of CW Chiller series signal - YouTube
2. Common Setting up manual
G.Weike USB mode laser manual video - YouTube
1. Beam alignmen
BEAM ALIGNMANET - YouTube
Leetrp 6515 Card Pin Definations
Translation maybe not so accurate..
9. Test if the yellow light of psu is off
GWEIKE test for yellow light of power - YouTube
8. Laser Psu light &ammeter value at noral working mode
laser power suply light &ammeter value at noral working station - YouTube
7. Test if the green light of psu is off
GWEIKE test for green light of power is off - YouTube
Step1 : copy the 65254301.1CF、65254304.1CH two files to root of a flash disk (your own flash disc).
Step2: power off the machine
Step3: Connect the flash disk to controller card(there is usb port...
Hi, if your machine is with 6525 card, and it freezed when working, then please try this solution
https://www.dropbox.com/s/3x2dnke5hz2ta0r/6525.rar?m
6. Switch Test if whole machine no electric
Switch test if whole machine no electric - YouTube
5. Auto focus switch test
Auto focus Swtich Test - YouTube
4. LCD panel Test
Test of LCD panel - YouTube
3. Laser PSU signal test
http://https://www.youtube.com/watch?v=9vnHoGiHXck
2. Laser tube problem or laser power supply problem
Laser tube problem or Laser powersupply problem - YouTube
1. Motorized Up and down platform not moving
http://https://www.youtube.com/watch?v=8uNVgVsCa6U&feature=youtu.be
Some PSU has no "Test Button". So when no laser, you can not fire by using the PSU. it is very difficult to isolate the problem, not can tell if its tube, power supply, chiller or software problem....
Hi, Dan,
Tube is OK , PSU and chiller not the same for 220v and 110V. Any broken part you can change in warrenty time.
Hi, Daniel,
First, i feel very sorry for your accident. You know, it rarely happened before, but it happens, that is life:violin:
Also sorry to hear you are not very pleased at our service....
Auto focus Swtich Test - YouTube