It has been a bit since I have been on here. My "Skubarouter" I built has machined its first 44gallon trashcan of aluminum/brash shavings. I haven't had much of an issue other than inputs vibrating...
Type: Posts; User: skubajon
It has been a bit since I have been on here. My "Skubarouter" I built has machined its first 44gallon trashcan of aluminum/brash shavings. I haven't had much of an issue other than inputs vibrating...
Thanks sir!
Sent from my SM-G955U using Tapatalk
Well it seems like my voltage fluctuates on the analog side. For instance, I'll be running a speed where voltage is 5.50 and it will drop to 5.48 and up to 5.58. So I'm seeing a fluctuation by .1...
I'll have to check that.
I'm still extremely curious about using auto tune and Sensorless vector mode which is why I purchased. Any ideas
Sent from my SM-G955U using Tapatalk
Well so far, I have to be quiet about it because my plan is to make a product.
BUT. I did turn my router into a measuring system using a Haimler. I put a stock in my vise and measured all the...
I have a wj200 and I have basically set the initial settings for the motor. I haven't messed with auto tune or Sensorless vector etc. Just the plain Jane settings and it's ran, for the most part, ok...
Machine has been great for the thousand plus parts it has ran. I upgraded the drive system to using idlers and it seems to run a bit smoother and now it's whisper quiet.
Producing some gun stocks...
I use timing belts to turn my balls crews. I machine mainly aluminum and cuts are really clean. Especially on a router
Determine what you want to machine and build to suite
Sent from my...
Denis. Following the datron concept you will see they use high frequency spindles. For budget purposes you can get about 24000 rpm.
This is also very crucial in a router due to rigidity. Datron...
I haven't attempted steel because I have all my steel sent out to machine shop and done on heavy duty lathe or vmc. This machine is for non ferrous prototyping in my home
...
Awesome to see another person wanting to do more than wood with their router! I built one and finished up last year.
I've been machining lots of aluminum and brass parts. I run probably 4 hour...
I purchased the wj and I'm extremely happy. My motor seems to run quieter as well.
It's probably a third or closer to half the size of the hyuanyang. My hy had all the decals for pin out upside...
I've been very curious output having a probe that is able to be out of way when machining, and then swing drop or rotate into a accurate repeatable place each time.. I just haven't messed around to...
Get on cnc4pc.com and find the contact section. Or [email protected]
Sent from my SM-N910V using Tapatalk
Another idea while searching world wide Web lol
If I upgrade to an AT5 belt system, (is it a lot better than htd5 or t5 which is my current), I'm not finding any type of pulleys that are clamp...
No iphone...I believe in technology advancement ;)
Well the 2 types of couplers I was looking at were 1, the jaw type and 2 the disc type offered by misumi. Dual disc to be exact.
I definitely...
OK so I can either go with Ryland style spider jaw coupling or Disc type coupling for about 1.5 times the price. I'm OK with price difference but want probably what's best.
So spider jaw or disc...
Ahh, so if I run my ac servos say half rpm, I'm going to lose some of my power rating? I don't know much about electrical motors
Sent from my SM-N910V using Tapatalk
Well I think I'm about to throw in the towel on my pulley system and go with straight lovejoy type couplers.
I get tons of noise when the belts are tight enough for minimal backlash, and way to...
Yeah I have had good luck with it. I follow it up with a nice cleanup pass after like 5 to 8 thou and 50 to 70ipm
I could go faster, but still not super comfortable yet. Using gwizard, I'm still...
http://uploads.tapatalk-cdn.com/20161025/8bb81b65e2972bf5a2bf9640b7bf3331.jpg
http://uploads.tapatalk-cdn.com/20161025/2785f7d53a2a80cc09a59b870d20db41.jpg
No hand guards yet...making my...
Milling aluminum
http://uploads.tapatalk-cdn.com/20161024/5b3b3909ded7f1dcfc0d40b97cdf3f28.jpg
158ipm at 15000rpm
https://vimeo.com/188599679
Sent from my SM-N910V using Tapatalk
I had that issue as well. Hit the estop and she stops moving....release estop and instantly takes off. Have to shut machine down and mach
Going to move to older version
Sent from my SM-N910V...
OK great. I'm going to do that this weekend
Sent from my SM-N910V using Tapatalk
I have latest version of Mach with the ethernet smooth stepper
Sent from my SM-N910V using Tapatalk
Ger, I did have a few issues with running away during probing. I'm using your screen set.
What it would do is touch off at initial speed back off then go to touch off again at the slower speed. ...
I will measure in mm tonight. Was just hoping someone had a blueprint etc for exact specs
Sent from my SM-N910V using Tapatalk
Good morning!
Well I have an import twin lock double lock 6 inch vise that I would like to make some soft jaws for. Originally I thought I could order the Kurt jaws and bolt them on but they are...
I crashed twice yesterday while jogging. Y axis was fine as it stopped from my limit sensor but when it crashed on z, I broke a 60 dollar end mill and ruined a part.
Jogging will be fine, then...
http://cnc4pc.com/Tech_Docs/C62R5%20and%20Huanyang%20with%20Alarm.pdf
Try this link. This is for the c62
Sent from my SM-N910V using Tapatalk