Thanks, I did use the M34 to synch but it was off that's before I posted here. We're going to have a visit from a Mori tech I'll be asking him about it.
I have another job, small part with the same...
Type: Posts; User: slp_prlzys
Thanks, I did use the M34 to synch but it was off that's before I posted here. We're going to have a visit from a Mori tech I'll be asking him about it.
I have another job, small part with the same...
That's almost exactly what I do when I just do straight transfer and I am in turning mode, but with my original post I have to be in milling mode
so as to make sure the holes are aligned since I'll...
I just realized my post above didn't make sense. I'm using Topsolid7 lathe for our CAM and the part transfer is not fully supported.
So I have to kinda have to hard code the transfer codes.
I'm not very familiar with MAPPS plus we're using CAM might as well do it in the CAM.
I'm the CAM guy since I'm new at it too, I have to run my own program to prove it while learning the app so I...
Thanks, I'll use that instead.
It took me a while, tool setup is a challenge for a newbie like me. I managed to complete the part transfer but synchronization didn't work.
We called the Mori tech guy, he has the idea of what...
We didn't get the chance to transfer today, we hit a snag. We're using a multitool holder and reached X limit drilling a 7" OD piece.
Hopefully tomorrow I'll be able to see how synch works.
Thanks.
Thanks. But isn't M34 the equivalent of that? I'm suspecting the home of each spindle is not on the same angle.
Hello everyone,
How does one ensure the angular alignment of both spindle when doing a part transfer?
Let's say we have bar that requires hex shape on both ends and we want the milled flats
to...
Thanks, we manage to take off the holder and retract the presetter.
I saved your instructions for future mistakes :-)
Thanks again.
Does anyone know how to clear the alarm for the presetter? or better yet
temporary disable the presseter? We're presetting a tool on the X axis
but pressed the wrong button, instead of touching the...
Hi,
Sorry, It's been a while since I've I built EMC2 on Slackware.
Where did you get your source?
I just pulled the source from git.
cd to src directory
ran ./autogen.sh then
./configure...
Yeah, I recieved a notification too.
If the seller is trying to scam buyers, he lacked the planning.
Ebay/Paypal has new rules, if sellers has less feedback they only get their money after 21...
That's what I thought, but I bit anyway.
try this, I use inkscape, just rename it. upload don't accepts eps/svg files.
Hello.
You guys should check this place:
Marche Aux Puces 5 Etoiles De Carignan
2375 Ch De Chambly
Carignan, QC J3L 4N4
There's an indoor surplus store there I'm sure you could find...
try this http://www.lis.inpg.fr/realise_au_lis/kicad/
and this (not) http://users.telenet.be/desi-iii/
or this http://cadsoft.de/
have you seen this http://cnczone.com/forums/showthread.php?t=59461
great job, I tried to do the very same thing, but was not able to complete it due to lack of knowledge :(.
Congrats to the winner and Joe it's been fun. :wave:
one more. i promise it's the last :wave:
am not trying to win the contest btw,
just merely provoking other creative peeps to post!
so joe et al could have a lot of choices.
plus i kinda like the...
and i thought i am through, here's a couple.
hoping to inspire more creative dudes to post.
vectored must see, just in case.
EDIT:
here's the last one.
just trying to get the other's creative juice flowing.
sleepy...last but not least.
I think I'm losing it, I promise I will never use this font again (chair)
what was the theme again? :)
Laserjet II/III series has nema 23 stepper, supposed to be rated at 100-oz/in I think.
here's another one, ...and it shall be called fun! :)
just want to join in the fun :wave:
If you chose to go the pic way, this might be right up your alley.
http://cq.cx/ladder.pl