Hello
Grind it!
Regards Boern
Type: Posts; User: Boern
Hello
Grind it!
Regards Boern
Hello maybe this helps you:
http://www.automation.siemens.com/mcms/mc/.../sinutrain.aspx
Otherwise SinuTrain is really rather for training purposes/ apprenticeships.
Or you are thinking about...
Hello would this be anything for you?
http://www.rampf-tooling.de/en/tooling-pro...oduct-overview/
Regards Boern
The 810D doesn’t have the surfaces of the 840D- both are identical, the 810D merely has a different hardware—just for your information...
Have a look if the cycles can be loaded, if not then LAOD...
Hello
What material are you processing?
What cutting data is run?
Regards
Boern
Hello
Come on be honest, if there would be a comparable freeware why would anyone bother buying Cimco. I think there is a lot of Know how in the software and that’s what you have to pay for.
540...
Get rid of the space between the C= and DC:
C=DC(356) A1..
C=DC(359) A1...
C=DC(1) A1..
C=DC(5) A1...
Otherwise you probably get the error c= not defined or something similar
Regards Boern
Hello
Go into your editor onto settings and press “non visible rows”
Or something like that, not sure if these are the exact words.
If you see now these rows, then you can delete them =>mark ...
Hello
You probably have a button ‘pivoting’, don’t you?
Do you not work with that button ( soft key)?
Regards Boern
Hello
What do you mean by dynamic?
What is the budget?
Simultaneous 5-axis surface quality especially depends on the CAM system, how exact the tolerance is set, of course, the machine does...
Hello
Have you got a key switch on your controller?
Maybe this will help you out:
http://support.automation.siemens.com/WW/l...bjaction=csopen
Regards
Boern
Why don’t you ask Heidenhain?
On their website you can find contact details.
Regards
Boern
Hello
Yes, it works!!
Have a look at the Siemens website and search for CYCLE979
http://support.automation.siemens.com/WW/l...082135&x=30&y=4
Chapter 5.6 CYCLE979 work piece: measure...
Hello
You can’t simply do something like that with a small parameter / variable adjustment!
There are several firms that are specialized in this area.
Vibrations of a collision are displayed via...
Hello
To mill a hexagon there are a few good and cheap software available to calculate it.
e.g. Geometrix
Regards Boern
Hello
You take a program that can gain access to the controller e.g. VNC server
And then Windows Like [ALTgr] + [Print] button and the screenshot is done.
Start Irfanview and process => paste
...
Hello
Create a neutral point or work with transformations
G54=
$P_UIFR[1]=CTRANS(X,122.255,Y,150.677,Z,-245.000,B,45)
The NP G54 will be newly written.
G0 G54 B0 ( is in reality B45 degree)
...
No, unfortunately not....
Hello
Does anybody know how to request the revolution speed Podi?
I want a minimum of 100% if not then error message....
Regards Boern
Hello
cast iron and chip conveyor are no problem together. It would be good to equip the cooling system with a blotting paper belt filter- so that the fine cast dust stays on the blotting paper....
hello
the cycle is called CYCLE95
i guess you just forgot a letter or something
regards
boern
Hello inTex
You can read out the magazine data, can’t you?
To separate the archive only works with a piece program or subprogram beginning with "%"
Or ending with ‘M17’ or ‘M30’
With...
Hello,
I wouldn’t call it outdated either… It’s nothing else than a home PC
One has a Quad Quore i3 the next one a i5 or even an i7 . the i3 is not outdated but a cheaper hardware option. ...
Hello,
Unfortunately you don’t have luck. CAD and ShopMill Programs together does not work!
No CAD/CAM program can write a ShopMill program as the Siemens high-level-language is very complicated....
Hello,
How do you write your programs and what programs need to be written? Shopmill programs?
Hello,
you'll find this in the character mode => Geometrie => set KEB
Here you'll enter NP , for example G54
than face or points of bore
Now follow the instructions lower on the left...
...
This information is a bit poor!?
The question is: ''Which controller do you have''?
Hello
Here you’ve got documentation concerning this problem:
>>here<<
Regards, Boern
Hello
Look in the machine’s documentation. Every manufacturer does its own thing in terms of M-functions.
Regards, Boern
Hello
I can’t understand your line with G58. What does it make?
G54-G57 adjustable displacement of zero point
G58 programmable displacement of zero point
G59 programmable displacement of zero...