I had a small crude program loader made, based on 90S2313. It works fine for small programs.
The program is loaded on the chip using a chip programmer. And when connected to EDM it transfers it to...
Type: Posts; User: kulk_sd
I had a small crude program loader made, based on 90S2313. It works fine for small programs.
The program is loaded on the chip using a chip programmer. And when connected to EDM it transfers it to...
Dear Sir,
I have a 2000V VMC. It is stuck without any error message. There are no faults shown anywhere, but machine dont run.
Please advice on getting the ladder logic softwares, wiring diagrams...
Please let us know more on the instrumentation part of the balancing machines. So that we can run some experiments on it.
Please let us know more on instrumentation part of balancing machines
I have read at places about wattmetric instrumentation for balancing machines. It is claimed that it given most accurate results. Please let us know more about it, if somebody has some information.
I have repaired part of the machine by checking for power supplies to various modules in the machine. But still have difficulty in starting the servo drives for axis. One drive tries to run away on...
If it is just relay logic, then only problem is loose connections. One can use any contact cleaner spray & reassembly the relays & connectors to rid the problem. This was tha case with my machine.
I have a sinking edm AGIE, Switzerland.Type: BF-h (Servo Hydraulic), these are very straight forward scheme compared to wire edm of similar date. It is regular transistorized plus RC type generator &...
Does anybody know about the Helmut's wire EDM. We need to communicate with him. The pictures are at Have Blue Dot Org.
dear sir,
do you have maintenance manuals or schematics of the machine AGIE with you. Please let us know.
Dear Sir,
can I get copies of the manual scan on e mail. please help me out to start a DEM400 with cnc 100 controller
dear sir,
can you help in getting schemetics, manuals for maintenance for DEM400 with CNC 100 controller. I have bought one & trying to start.
Yes & let me have more photographs of the work, so that I can completely view the work.
dear sir,
please check the voltages supplied to the motor, this you can check by a multimeter with wires disconnected from the motor & switching the supply to motor ON. and use any centrigugal pump...
The grit will be minimal with the wire cut machine. The regular pumps used for slurry handling if not costly you can go for it. Otherwise a regular centrifugal pump giving required pressure &...
what is it like, any information ??
are you interested in selling it.
why dont you replace it by any other pump running on the same supply
do you intend to publish the scheme, you have worked with, like circuits & other details.
Dear Sir
I have a complete AGIE DM400 machine for sale. I have started it after buying it from USA. Please let us know if you are interested. It has the CNC10 controller D100 generator & all...
Dear SIr,
I have a complete AGIE EDM SINKING in working condition. I am ready to sell it if you are interested, at a reasonable price. And I have a 1980 400 D AGIE wire EDM also> I am looking for...
Dear SIr,
We will be glad to receive a copy of the manual on chargeable basis. The machine panel is disconnected from thr machine body. Thus interwiring detalis are very moch necessary to start the...
Dear Sir,
I neeed the wiring diagram, maintenance manual, & instructions on how to start/use the machine. The deionizing bottle is missing. Thus I will need the bottle along with the copies of the...
We are looking for help to renovate/ re start old AGIE puls EDM & MA400 wire edm with fast track & cnc100 control. Please let us have some information.
We have bought it from e bay & wish to use it...
Please let us know where to look for information, like manuals for an used AGIE make wire cut edm, model MA400. We have bought it on the net. And are interested in startig it.
Please let us know the present status of the project.
Please keep on updating so that we are aware of the progress. I am very much interested in making a really good WIRE EDM machine.
I think that will be an interesting project to follow.
Regards
S. D. Kulkarni
Dear Sir,
Please let us know when you have completed your trials
Regards
S. D. Kulkarni
Dear Sir,
I would like to have the plans for my hobby shop.
Regards
kulk_sd