Hello
I am selling 5 new, unused servomotors ClearPath CPM-MCPV-3421P-RLN
They can be controlled by I/O signals, switches, buttons, PLC, etc.
They can be easily used for tool magazine indexing or...
Type: Posts; User: Margean
Hello
I am selling 5 new, unused servomotors ClearPath CPM-MCPV-3421P-RLN
They can be controlled by I/O signals, switches, buttons, PLC, etc.
They can be easily used for tool magazine indexing or...
Hi guys
I sell the following disassembled components from a Cincom citizen L20 machine:
Mitsubishi Citizen spindle 1.5Kw 3.7Kw SJ-2B ; 1.5Kw SJ-PF
- 1.5kw SJ-2B - 1700 euro
- 3.7Kw SJ-2B - 2000...
Hi guys
Can you help me with the parameters for a Hardinge cobra 65 with numerical control Fanuc 21-T.
The battery died and I lost the parameters and unfortunately I have no beckup.
Thanks!
Hello
This alarm was generated after entering the parameters, or during operation?
Hi
If the machine does C0 but stops after, it may not like something in the program, check at least 10 lines of program after M18C0.
Usually if it does not give an alarm it has a problem with the...
Hello
What it means is not working?!
The machine does nothing, or the spindle rotates slowly and does not stop at C0?!
Did you set the parameters again, or just didn't want to do C0 anymore.
Do...
Hi
To the components so far, the following are added :
Mitsubishi HR 122
Mitsubishi HR 123
Mitsubishi HR 841
Mitsubishi HR 083
And we have an offer, You can buy everything for 4700 euros !!!...
We give invoice for components that we sale
Hello
Sorry, I was in a hurry and written my email wrong.
Good email is [email protected].
Thanks
Hi guys
I sell the following disassembled components from a Cincom citizen L20 machine:
Servo Drive, Mitsubishi MDS-B-SVJ2-07 0.7Kw
Spindle drive, Mitsubishi MDS-B-SPJ2-22 2.2Kw...
Hi
You still need those parameters, or you solved the problem?
Do you have other types of Citizen, such as Cincom Citizen L20 Meldas 600?
Hello
Does anyone have any knowledge of how I could reference the tool magazine of a Famup MCX600 machine?
It has Fanuc 21i numerical control.
The problem is that the power dropped when the...
I disassemble a Cincom Citizen L20, who needs components like motors, controllers in general the electric side please contact me at [email protected].
If I posted in the wrong section, ask...
Check if the machine wants the turret to be done with the closed doors, check if you have all the doors closed from electrical panel, side, hydraulic, etc ...
Turret parameters are almost the same...
Just ask a tool in MDI , the turret does not know in what position it is.
At the and of the PDF you have the list of general error, I will try to find for you specific list of errors.
Hello, you have the parameters below, but you have to keep in mind that the MT600C has larger axle sizes.
Hello
I have a machine(numerical control Gildemeister NEF CD40 EPL2) with this type of alarm "964 PRUEFSUMMENFEHLER PARAMETER", that translated means "PARAMETER CHECKSUM ".
The problem is that the...
I forgot to specify that has Siemens 840C numerical control .:D
Hello
Can somebody help me with the M codes for Gildemeister Sprint 65?:cheers:
Thanks!
Hello
I have a problem with a machine that 2 weeks ago hit with the spindle the arm of the magazine.
As a result of the Z-hit, the thermal relay jumped.
I checked everything in the tool magazine...
Come on guys, no one !?
Hello guys
Can someone please help me with the parameters for one MAHO GRAZIANO MT 600 C, the machine has not operated for 4 years and has lost all parameters.
CNC: Philips 532 T / 8 ; Turret...
Hello
Please help me with the parameters for one MAHO GRAZIANO MT 600 C, the machine has not operated for 4 years and has lost all parameters.
CNC: Philips 532 T / 8 ; Turret SAUTER
Thank...
Thanks wildwestpat.
You gave me very useful information.
I decided to use unipolar drivers that i have , namely those with L297 and MOSFETs.
Thank you so much!!!:cheers:
Well, you convinced me that unipolar driver is better, but now have to buy at least 4.2 Nm motors to have a power of 3 Nm, unipolar, and the budget has increased significantly from 240euro to...
Hi Thanks for the reply. I know you are right, I want speed to, but I do not like to lose,
that the unipolar , one third of motor power.
I wish to use the motors at maximum torque.
If I need 3Nm...
Hello. Thank you for answers. The problem lies in the following way, currently I have a small CNC, which has this controller http://www.epsicom.com/docdown/ep0300.pdf . This is a unipolar...
Nobody knows any drivers?:confused: