Search:

A quick update before anyone wastes any time on this.

The key to changing parameter values quickly is the >> key. Lets you select which digit to roll up or down.

I was thinking, why would...

I'm just trying out a 2.2KW LaPond SVD-PS VFD. My first impressions are very favorable. Manual is huge (paper copy comes with drive but you have to email Amazon seller to get it PDF),...

Parameters such as PD176 are usually there for a reason. Anyone else know what this specific one does?

Spindle is 400 Hz, and the VFD is correctly set up with all the specs you gave me last Saturday on my other post regarding vibration.

So, the question still remains. On that VFD, why is there an...

I'm on 60 Hz power. New Huanyang HY02D223B purchased on Amazon in US came in with PD176 set to 50 Hz and this parameter seems to be read only and can't be changed.

What will this affect, and is...

Thanks. I wish the manufacturers would put colorful stickers to that effect on new spindles. Don't know how a new user should be expected to know. My old Porter Cable 7518 router mentioned in...

I wouldn't have done the return so quickly except that there was only one more set of these available (0 now). Everything is getting so hard to source.

I'll run it all day tomorrow at higher...

I ran it at 6,000 RPM for a few hours, noise seems to be getting worse.

Initiated replacement order with Amazon.

Thanks for your help

Checked the parameters, made minor changes, they all look okay.

Motor still has strange sound.

I'm still not clear from your response if you were able to actually listen to the .mp3 or .MOV in...

Thanks for responding.

I used non shielded 16/3 cable (all I could fit in the too small connector shell), however I don't see any evidence on the scope of any problems related to non shielding....

Hi,
I've always run a big trusty Porter Cable router but decided to upgrade to a spindle, so I purchased a 4 bearing 2.2KW water cooled spindle and VFD from Amazon.

Spindle - says Zhong Hua...

Hi,
I have a completely different situation than most spoken of here. I made my 4'x8' CNC wood router out of 15 pound 6" x 6" I Beams (1/4" thick). The horizontal X axis spans about 10 feet. The...

I would appreciate any information on the relative merits of MeshCAM vs. Cut3D, especially real life experiences.

Does Cut3D offer any real advantage over MeshCAM?

Vectric says (unverified)...