I am just getting started with Partmaker Turn, Turn / Mill and Swiss V2013.
I was wondering if anybody out there has a tool library available for download?
Type: Posts; User: The Pininator
I am just getting started with Partmaker Turn, Turn / Mill and Swiss V2013.
I was wondering if anybody out there has a tool library available for download?
I have 8 ENC-162, and 3 ENC-164 machines. We are in need of training, help, advice and tips regarding setup, repairs and operating these machines.
I am willing to pay all expenses to get someone to...
Thanks for the input. I'm going to start tweaking some of these programs a bit. If I see sparks or fire I will back off :-)
The reason I ask this is because I am looking at hundreds upon hundreds of programs done by at least three different programmers over a span of 6 or 7 years, and they are all done this way. While I...
Thanks for the reply cogsman1.
Lets assume the DOC is minimal, .01"-.03" and it is not titanium but rather 17-4 stainless steel for example. Is there any reason for the feedrates to be at the .0008"...
I have been messing around with some Tornos ENC-16 and ENC-164 machines lately. I have been learning by going through older programs and one thing I have noticed is the feed rates. Being a regular...
OK, so we have this Tsugami NP32 that's been sitting in the back of the shop for the year and a half I've been here and then some. I fired it up the other day and everything seems to work fine, so I...
You should lead in with a G01, then use the G42
This explains it better
http://tinyurl.com/29s9vx
Surprised that's not in any of your books?
:withstupi
Duplicate post erased, sorry 'bout that
Thanks for the reply cogsman1. I should have mentioned that the insert that is predominately being used is a Kennametal 1/64th radius KC5025. Depths of cut are well within the insert recommendations,...
I started a job a few months ago and we have a few Tornos Bechler ENC16 with Fanuc O-T controls. This is my first contact with Swiss Type machines, so pardon my ignorance.
I am learning by studying...