MDI mode, Press FUNC & ALARM key, select Diagnosis at bottom of screen. They are under that screen
Type: Posts; User: AMADAJOE
MDI mode, Press FUNC & ALARM key, select Diagnosis at bottom of screen. They are under that screen
Did you resolve issue? That control is not supported. Battery maybe on MC 061 board. Any time you are looking for help on that machine make sure you tell them it is F control makes a big diff.
Watch machine closely when does alarm occur? During Turret change, Reposition, Striker movement. The control is not receiving a signal with-in the set time.
If your servo valve is faulty. The spool may shift to one side, bleeding all the pressure from the manifold. Your display will read 0. We need more details to help.
See my advice above
2091 Is a general PHNC alarm on the CNC side. Go to the PHNC screen and it will display an alarm code
1. What version software? I may have 4.17 self extracting
2. After reload software if still same condition CPU maybe faulty. I may have 1 CPU, I can load with software and send to you.
3. Email...
All good info. The only thing I would add is resale value. If at some point you decide to upgrade selling off brand equipment can be difficult.
I generally set 340=3 341=3 that tells 6M look at param 312 I set 312=00011010 2 stop bits & 9600 baud.
On set page( if uploading param to laptop)
punch code 1=
input device=1
input device 2=1...
I emailed you info, if you dumped memory you need to load PC parameters in manually. The 6M does not have the function to read in or out from the port for PC param. They are located under the...
I am not sure what model you have. If it is P344 check diagnostic 48.7.
That is bit on far left. See if it changes as you push single button on and off
How did you load parameters in? By hand? Did you load all your timer parameters? Give me machine model and turret layout, maybe I have a parameter list. Email me at work [email protected]
415692
Press and hold Lower Limit switch in yellow circle. Have some one start hydraulics. Once Hyd are started move ram up and down. You may have mechanical bind. I have seen a piece of...
Sounds like you are in Single Mode. If this is a Fanuc 6M top left side of Mode Switch (Single). Make sure this button is out = off.
If its 04PC you will have blue button Single. Led should be off.
Usually people leave the ram lock lever on the left side on (down). release the lever. you should have a yellow button on the face of the ram. Ram Lower with amber light. Press and hold button.
Lapis Services? What do you guys service. LOL.......
Joe Lewis
Sorry I did not see the email. Can you resend? CC, [email protected]
Drives do not have codes unless you have a problem with the drive. 414 is X axis issue, usually I look at feedback cable 1st encoder 2nd. What Vipros is this? V357 w/ 04PC or V255 w/18P
This is a very important point, many end users do not consider. Support after the sale! Parts, service, documentation and tech support. I have witnessed many customers buy new equipment from off...
Why are you overcharged on your accumulator? If you are @ 60 bar and manual says 30. You need to drop it big time. I have never had any reason to adjust valves. If you are going to move valves,...
No problem, Email me, its easier for me to share info
[email protected]
Check the rollers under the clamp. Check condition of brass bar. When the clamp rolls onto the brass bar it grounds it. You also need Y axis Override limit to be made in order to get override confirm...
"Macros in an Amada are written by the user" Not all macros are created by end user
When I say no macros in an Octo, I am refering from the factory. If end user created a macro no one will have a...
1st off you need to run the correct oil. Amada techs dont put in various oils and record what happens. 2nd I would check your accumulator pressure. When ram reaches bottom of stroke do you hear a...
I have never seen an Octo with Macros. Unless you have a strange option like programmable work clamps or running a sheet loading system. But even in that case we were changing the ROMs on the PC...
Hemikiller, Thanks for the kind words.
Cheers
"It's too old for Amada to know, their engineer told us to write- off the machine." LOL..That is funny. You need a special cable to hook up standard PC keyboard. Email me pictures of your CPU. Amada...