Search:

sounds like your 24vlt circuit(E-STOP)... is being pulled down when your shifter is moving.... shorted wiring or prox switch in that general area would be my guess.... hope it points you in the right...

I have seen this with pumps that have some age on them...
The tolerences inside the pump open up and pump will no longer hold coolant in the lines... It basically drains back thru the circuit when...

i have an 87 H630 with M32 and same Problem...
Mine is on the X axis... AL 37 on control screen....
when you open up your electrical cabinet....
At main power on you should have displays on all...

I am thinking from looking at the drawing that you are dealing with a H400N integral spindle,the rotor of your spindle motor comes out with the spindle cartridge still attached..... Your motor...

Just curious if anyone has had issues with SHINKO ac drives used for tool magazine drive and rotary table drive? i have one that the processor in the drive does not like the power removed from it......

like it was said in previous reply you run the chance of trashing your set of disks if the drive is what is destroying your disk. if your drive is not trying boot up on powerup (red led flashing a...

check up underneath the column... y axis cover assy. it is often forgotten but does build up after time. are cover wipers in good shape? if not it is more than likely your leak. could also be your...