Search:

If material has to be removed, you have to cover that area with the mill. If you only want to remove some of the surroundings and the pockets in the claw, you can draw another vector around the part...

To bypass all thickness- problems: Make sure your workmaterial is somewhat thicker or equal to your model, and your bed is flat.
Zero the Z-axis on the top of your material for the first side.. When...

manually?? (print the excel-sheet and create your tools in ArtCam's database)

Kees

Can it be equipped with a Moshi controller? (like many chines lasers)
See if you can open the cabinet-part containing the electronics and take a picture of it. Especially the controller is of...

Is this black tube with tape, your lensholder?? It is surely misplaced..
When you post a clear picture of the whole part (with mirror, lensholder etc) I can think out what to do.. Are you able to...

I use it for over 3 years now. And never changed it.. Maybe the cooling is fractionally less than destilled water but i don't notice any difference in cooling.
Everybody, who wants to hear it, is...

I'm quite sure the windings itself are fine. Only the leads from the coils to the plug have isolation that is cracked. this is the cause of the shortcircuit.
If there is no normal/easy way to push...

Is there a way to get the complete stator out of the housing? (1.5kw aircooled chinese spindelmotor)
So now and then i got a "dl"-error ( shortcircuit output). i found that one of the wires touched...

Is there a way to get the complete stator out of the housing?
So now and then i got a "dl"-error ( shortcircuit output). i found that one of the wires touched the rotor and also that the insulation...

Yesterday my Huanyang VDF (1.5kW- 230V 50Hz) gave an error EOcn (Overcurrent at constant speed) while doing the thing he did for years : V-bit carving in hardwood.
After a reset it started again...

Yes, that is if your laptop runs windows, has an USB-port free and you don't overload it with screenblankers/virusscanners/firewalls/other timeconsuming highpriority software

Preferably: make a...

I think you can savely join the site else i will ask the moderator/owner if he has an account for you.. let me know..

Kees

It's not only the shielding from a box around the controllercard. It's all your wiring and how to place your components in the cabinet. I wrote an article on the Dutch CNCforum about that but it's in...

That must be an introduction.. Here in Holland we have to pay an extra 21% Tax over those listed prices.. :-(
Try to find a nice box for the controller. And get your grounding (earthpoint) right!!...

Can't find it.. only that the prices are Excl tax (BTW=21%) now.. almost everyone has to add this 21% Tax to the listed price.
But Bert Eding himself often gives a discount on CNC-meetings when...

My CPU5A4E is boxed in his own aluminum box. Therefor i made a "breakoutPCB" where all wires are soldered to.. BTW. On the picture is my former card without Ethernet..

it's a mini! try to find a shielded cable or with ferrit beads.. and not toooooo long (< 2m preferably)

Kees

That are settings i referred to!.. I was abroad so i couldn't check it for you...and the exact terms didn't pop up in my mind..
Kees

I have Leadshine's but i think i could be jealous about your Gecko's..

Kees

Your question is answered now?... i guess? good luck programming your macro's :)
Kees

It is saver to move the save-Z up first.. else you will drag the mill through your work :

G0 Z10 before you make any other move. Z10 can also be Z20 or Z 5 or Z #1010 (if you filled #1010 with...

Ah, Ok.... seen from the box, you need a positive pulse to drive Dir and Step while other drivers have a common + and will be driven by a signal to ground.
I will check later if this can be done...

if you take care Not to connect a plus voltage to a minus connection you won't see or smell smoke . A wire is a wire (although a shielded wire is better in most cases) Just follow the manual step by...

in this brochure you will find all the details:
http://www.edingcnc.com/upload/files/cpu5a_flyer_tech.pdf
Kees

there is a setting in one of the menu's on the display/keyboard where you can select what parameters to use: or the keyboard or the file's.
That might fix your "problem"

Kees

And what is the question? (if there is any..)
Kees

in a few days i 'll be back and then i can guide you through this.

The manual covers it all but you have to find it, sometimes between the lines.. But there are a few parameters (from my head, i think somewhere in the #5400) that can be handy. The trick is to copy...

at least 2 (you and me)

it sounds logical to me. Only the value of the resistor, as advised by the manufacturer, is something i want to know more about.
My tube is 60W... what would be the value to have a good reading on...