I have to assume it supplies the voltage to the laser unit. It's got two large fans and a huge heat sink on it. Along with a rather large, black cable that resembles a coaxial cable on steroids that...
Type: Posts; User: photoguy
I have to assume it supplies the voltage to the laser unit. It's got two large fans and a huge heat sink on it. Along with a rather large, black cable that resembles a coaxial cable on steroids that...
I just got off the phone with Chris at Photovac Lasers in Ohio. (Luckily not far from me)
I'll be sending the laser tube and inducer assemblies for inspection/service. He said it sounds like it's...
The test pattern is just two small images to test the rastering and vector cutting to make sure things are firing. It takes about 90 seconds to do the test to make sure things are firing.
I...
Ok, just went through and did a detailed examination of the electronic parts.
I opened both of the power supplies. Took everything apart and all connections are solid. All solder connections are...
I've got a Laserpro Mercury laser machine and I firmly believe it to be either possessed or schizophrenic.
It'll run like a dream one minute. But, if I turn it off and come back later, laser won't...
Ok, another update.
It has stopped firing the laser for vector cuts. The laser does fire and the carriage follows the paths but the laser isn't firing consistantly.
There's a light on the control panel on the laser itself that comes on if any of the doors are open. If any are open, the laser doesn't fire at all.
I'm not trying to engrave the vector lines....
Alright. I've got a GCC Mercury laser engraver sitting here and it's got issues.
The laser won't fire to engrave (raster) anything but it fires for vector cutting. (usually works fine but...
Hello all,
I work for a small company that has recently (within the last year) acquired a Laserpro Mercury 40w CO2 laser engraver secondhand.
After a few small hurdles we were able to get it...