Search:

the pci card went wrong a couple of months after using it and they now have a very good way of pinpointing problems with this now, it was my 1200 which had the problem. the quality of the 900 and...

The distance for focusing is 59mm and if you go to wklasers site you can download a manaul with all you need to operate your machine , if you cant get this send me a private message with your email...

I change the water every three days as recommended in the manaul this as you know is very expensive using deminalized water at 30 litres a change twice a week at a dollar a litre = $3640 per year...

you will find the service from wklaser the best there is from china and the lg900 is probally their best machine ,

You may consider letting a young computer geek to install the software for you as...

You will not be able to cut exterior ply that thick but interior ply you may just cut the thickness you want, it all in the glue.

it took me a long time to find a ply that would cut quickly and...

where are you located in the UK,

AS i see your english is not up to much and you seem to be the one that paul c is looking for who paid for a laser he has never received ,

If your not PROVE IT...

There is a big wide world out there and it is not called America

What Ever You Buy Do Not Buy From It Connections
They Do Not Honour There Warrantie In Australia So You Will Have No Chance

Micheal
I have four machines from wklasers and you can be sure that they honour what they say bearing in mind that you are in ireland and they are in china speed on fixing a fault will be a bit...

Hello Jim,
Try www.reddotinternational.com They sell there machines so they should help you weather they do is another matter.

Good luck

Buy direct from WK lasers you then will have back up from the factory and save a lot of money

I have 3 of WKs lasers and am just about to complete the set with a LG900.

AND I HAVE NEVER HAD ANY TROUBLE WITH THE TUBES and if you bear in mind that there are thousands of these machines...

Advantage Jinweilke

Hello
Maybe you should be looking at the pci card as this controls every thing the laser is doing, i Have dsp version 1 and also 5 if yours runs with 4 i dont think you will be able to work it with...

Hello
I have a lg 500 and i use it for photograhic work mainly and have found this to be very good software used is photograv and does all materials,

If you buy one try www.wklaser.com they are...

They care okay maybe you dont want one as bad as you seemed as im sure with all the surfing you are doing your find him

His name is Jack Yin

Email [email protected]

He speaks fluent english and if you ask him he will email you prices on all machines

Yes it is the lg500 table size is 500 x 300 it comes with a wind up and down engraving table you need to add a cutting table, and yes it is 60W, yes it is the same and yes there is a english website

Hello,

I had a similar problem with mine with MPC03 software cut all ok but engraving was doing something like yours.

You need some one to test the PCI card as one or more of the soldered...

Hello Rob,

If you think that is cheap check out the manufactuer of this machine www.wklaser.com , i have three of theres and the last being this one,service is good from them and i payed 2000 usd...

Hello Neil,

A very informative web site you have, probally one of the best out there at the moment.

The one thing i cannot see maybe im missing it is your location address as i cannot find it...

I dont know how the support will work from a stockist as they to are just as reliant on supply from china, if you want to buy ten lasers say at 5000 us and the stockist want two to three times as...

Hello Paul,

Sorry to see you are having problems with HKXY and hope you get your laser and works as it should and when you do maybe he should go back to makeing his model planes and not lasers as...

Here we go again,

Just one email from him would put your mind at rest which you would think he would do as so many are watching to see if he will in deed be as good as he
promised earlier. I HOPE...

Hello

I have two lasers built by this company which i have used for over a year now and the only problem i had was with the PCI Card in the 1200 x 800 wich is a step servo part driving the soft...

Hello Mike,

I Think you have just answered your own question, both are trying to improve
the service they are offering and as i already have two lasers supplied by wk lasers and find the build...

hello Mike,

Your have to give a bit more info such as the wattage of your machine and do you have air as most wood will burn without air blowing to put the flame out,

Then set your speed at 10%...

Thanks for the reply Steve,

I will pass this on to those concerned.

Regards

Trevor

MESSAGE TO LOW COST LASERS IN THE UK
F>A>O Steve

I have just had a look at your web and prices for your lasers.

I see all solicitor languge as to your protection regarding the sale of your...

Email David Chan,

He will email you the software as it will not cost him anything to do so