Search:

sorry double post

Phil
tarnish1

Posts: 3
Joined: Fri Jul 16, 2021 8:32 am

Hi,
Dont know if anyone monitors this thread nowadays, I have a Fuling dbz300 which is running via modbusez. the issue is that when 10000rpm is commanded in mdi the spindle only spins at 7500rpm....

Hi,
This issue has been resolved.
I had the convert arcs to lines box ticked in the "motion Control" tab on the operations. once ticked on an operation, it defaults to that setting on new ops...

Hi i have an issue,
Solidcam will only produce faceted arcs (segmented lines).
I have the VMID file showing Support arcs etc but it will only put out the segmented lines.
I have changed The VMID...

Hi Guys, Thanks for the input.
I had the PWM connected correctly (step pin) but had the setting set to active low, I changed it to active high and all is good.
Had to calibrate the speed to the...

Hi everyone, first time for a long time posting so bear with me on this.

I have one of the sangmutan motor and speed control packages running on my HM45 milling machine, which has been used as a...

Hi Brendin,
No, I had a brief dialogue via email with salecnc when they seemed to lose interest and I havent had a lot of shed time of late to follow it up. However based on my experience I...

Thanks Gerry,
The pendant you pointed out does indeed look good! however the designer is in the process of making a new type and cant supply at the moment.
The wireless pendant arrived and has some...

Dont know, but Ill tell you soon, I just ordered one for my mill.

Phil.

Hi,
I to have a stepfour router, and the simple fact is you need to increase your rpm in order to get a smooth accurate cut in balsa. (i use 35-40000 rpm and 0.8 mm diamond cut router bit,) I to...