Search:

Hi, I need it as well.
Could you send it to [email protected]
Thank you!

HI,

I need to make 5x equally spaced holes along a 8.21" R spaced at 7.78°. Stock is 6.63 "x 3.5" (Haas vertical Mill)
The first hole is located at X1.1 Y-0.73. (Part zero is upper lefter...

The attached part requires a 0.194" thru hole with a 0.349" counter bore at a depth of 0.25". The material is steel and I will be using carbide spot drills, drills and end mills.
My question is,...

Awesome thank you! I'm rigid tapping and using an ER Collet holder. I was looking at the Starett drill chart which recommends a #36 drill for a 6-32 tap but I am going to try a #35. The shop I work...

I'm trying to tap hole with a 6-32 tap .700" deep in a 1" hole but my taps keep breaking. The material is an Aluminium casting and I'm using a size 36 drill bit (.01065"). I've tried speeds at 300,...

From what I've read they are very sturdy, but people have problems with the Y-axis location going off center during machining and also that the machine itself isn't compatible with most other G-code...

Can anyone help? I attached a screenshot, thanks!

Hi,

I'm put a small slot in an aluminium loop, and the old saws I was using went dull quickly, so I had my company order a long lasting carbide one. Since it costs a good amount of cash, I want to...

I'm new to gibbscam, and am having trouble when specifying the thickness of stock. No matter what numbers I enter for +Z or -Z, no thickness is shown. I know its something simple, but I'm having a...