I believe so. How would I check if that’s bad? Or maybe my phase converter is the issue? Not enough coming into machine? I’m not sure.
Type: Posts; User: jpthorpe1041
I believe so. How would I check if that’s bad? Or maybe my phase converter is the issue? Not enough coming into machine? I’m not sure.
So I know it’s been a while but I’ve been digging into this project a lot more than I expected that I needed too.
1. Figured out the pump was bad so bought a new one. Chiller functions properly....
Yeah it looks like it ran to a fuse that is intact and labeled as the right one as well, I will have to trace it with power and see where it stops.
So I have purchased a 1994 Fadal 4020 and I'm pretty sure it's in good condition. I have ran a few parts through her and had great results. I have too many questions so I'll start slow. I found a...
Thank you sir, the M39 worked perfectly.
I hit reset during tool change by accident and now the machine has the tool in the umbrella but thinks its in the spindle. So if I try to change tools the spindle runs into to tool in the umbrella...
i posted in here because i couldnt find a haas lathe section... where is it??
whats a spindle liner??
sounds like an easy solution I will def do that, also does it always take a while to switch out the collet holder for the chuck on these or is there a special trick to it????
At work my boss has an sl-10 and we were trying to figure out if we can program the chuck to only open to a certain dia so we can use the bar puller without the part falling into the opening. Does...
yeah i looked at that, swivel jet i think. they just look like the lock line i already have and i feel like theyd be pain to tighten without moving around? Do you have any of these problems?
yeah all the machines we have are enclosed cnc grinderss
yeah I saw some stuff on Cool Grind i'll probably go that route, do you know anyone who has used their stuff?
I have been looking into a couple companies and doing some research on coolant application. I have read some interesting numbers telling me that there are some considerable benifits to specialized...
legmt - that makes a lot of sense I knew that there had to be soemthing along those lines you could do. The only thing is you would have to do this for each one right? THats why i wanted to get it in...
To answer questions:
External threads
tried at 200rpm
The m19 - says I have it but it won't let me activate it
and the small end of the threads will be cut off so it doesnt matter the...
It is going to be 3/8-18 NPS
We did not cut the taper off first
it is made of hardened steel
and we are using hertel carbide npt threading insert
I have an SL10 and a bunch of fittings that come in as 3/8 NPT and I need to rethread them to 3/8 NPS. Whats the best way to go about this? I have just put them in a round collet and just recut the...