Search:

Those are not going to fit well into a BT30 spindle. Thanks though.

Ydna,
This is exactly what I’m finding. I visited a running DT1 and DT2 and it was explained exactly as you did. This is why I have been looking for a 3 insert. I think I may get the maritool...

Thanks. I have been looking through the Maritool and have a few picked out.

Have you tried Kilawood? A local rep is pushing them. I’ve found them online for about half the price though. I do not...

I am about to purchase a Haas DT2. It will have a 15K spindle with TAB and TSC.

I will be needing BT30 tool holders (g2.5 15k balanced) and TSC pull studs. What are good brands to look for and...

So, any updates?

Is there any difference in the spindle between series 2 and 3? Sounds like the series 2 is in storage, know any way to check backlash without power? Are the screws or couplings accessible without...

I would love to buy a new machine but used fits my budget. I'm looking at two tormach 1100's. One is a series 3 and the other a series 2. Other than the motors and stepper drivers, what's the...

Here are a few of the things I've made:

eMaxx Mount for the CC1717
http://i161.photobucket.com/albums/t213/atrepair/DSCF9471.jpg http://i161.photobucket.com/albums/t213/atrepair/DSCF9469.jpg...

As a newbie I've had to do a lot of reading to get up and going. I'm starting a list below of the links and info that has been helpful.

Inspiring Builds:
FandZ's build

Calculating Endmill...

You need to go to the Post Processor download area of their website and get the one you need.

Budget is what got me into those since I could not afford THK rails.
For my next build I plan to try Linear Carriage on Cold Rolled Steel (CNCRouterParts.com). I doubt my budget will increase much...

I use a Bosch Colt and really enjoy it.
The variable speed and soft start work beautifully.
I have cut wood, plastic and aluminum without any issues. I have done a little engraving with it also....

I have some just like them and wish I had something else. There is too much deflection on a 2x2 machine. I will NOT be using them on my next build.

I purchased a mostly assembled home built CNC that someone was intending to sell as a kit. Quickly I learned it was not designed properly and the electronics were junk. Thanks to a lot of great info...

I really like the design. It looks like it has rigidity that mine is missing. I hope you can post videos of it in action soon. This gives me some good ideas for my next build.

Either it is my Dolphin CAM or my post processor. I'm just not sure why it suddenly changed.

When I use the test files (previously posted)

The working code is:
( Produced :- 10:45:25 ...

Metalworkz, Changing from Incremental to Absolute in Mach gets me the the same result as forcing it within the G-Code. I do not know of a way to change it in Dolphin.

Harley4ever, Where did you...

I tried replacing the postprocessor files as before but no dice this time. I've also tried the current ppr files on Dolphin's website, no dice there either. :(

For whatever reason the problem just showed up again today.
I made some new parts yesterday with no problems. Haven't made any changes to settings that I know of between then and now. I can get my...

Nothing special. It's my first useful part and the first one I cut on my own machine.
I used these to mount my Bosch Colt router which is a 2.75" diameter.
...

That's my guess, they must have been corrupt. It's all I changed and it's working now.

Thanks again everyone for the help. Here is a picture of my first part. It is not overly impressive, just...

Andre,
Thanks for the help. I copied the post processor files over my existing ones (which showed they were the same size) and it appears to work.

Yes, that is the file I am using.

http://i161.photobucket.com/albums/t213/atrepair/Forum%20Pics/M_MACH3.jpg

Here are some pictures of tests I just did on a simple shape.
I drew the same basic shape with the Incremental and Absolute button in each position in the D-CAD program and did not see any change.
...

Yes, it is very simple to change the IJ mode in Mach3. It has worked for me in the past with files given to me by other people.
The problem is that I have the usual extra arcs that come with having...

How do I change between Absolute and Incremental IJ Modes in Dolphin CAM?
Is it just part of the Mach3 Post Processing or is there a place to select it?

Nice looking nuts, good prices too. Have you tried them?

Thank you GeckoDrives! Problem solved. All it took was getting a G540, no more drifting.

I can get a solid 300IPM with ZERO drift. I figured I'd be able to eliminate the drift but not at that...

I'm still getting drift. Drift direction and amount still changes with increasing or decreasing the feed rate. I have been able to get close but not good enough for engraving. It inconsistently...

Sorry for the delay. I wanted to verify for my self that it is a good card before posting a link.

It arrived today. The card installed drivers automatically (Vista 32bit) and all that was needed...