Sorry to intrude, tested with the spindle encoder, maybe this this fails with a wrong orientation. I guess I tried these things but sometimes the simplest things we do not see.
Mod-Mec Greetings
Type: Posts; User: mod-mec
Sorry to intrude, tested with the spindle encoder, maybe this this fails with a wrong orientation. I guess I tried these things but sometimes the simplest things we do not see.
Mod-Mec Greetings
I had the same problem and solve it by changing that parameter and placing M90 in each block to move in G01. The m90 is not modal, when executed automatically disables the block.
Test M8
Try parameter 1390.0 from a 0 to 1 that should work.
Heidenhain manuals I have them all, service manual, installation manual and manual operation, which I have no manuals Bridgeport is where are the wiring diagrams and other things.
Hi Andy, for starters you should be using the TNCremo to transmit, you can download the page Heidenhain. As for the braking of the corners is fixed in each block adding M90 G01 have to make this work...
Rmarch Hello, I wanted to ask if you have the service manual or maintenance, because I have no technical info about the machine.
Thanks
Rmarch Hello, I commented that I have 2 Bridgeport Interact 412 Heidenhain TNC 151 control, both drivers Bosch. Model 1987 and 1988.
The error "axis psu fault" happens to me in one of the machines...
These images are from time proved the lcd, there is also an option in Europe to a company called "tsubis" but it was wasteful but is much simpler to replace.
Heidenhain BE211 reemplazo del monitor. - spanish.alibaba.com
Works without problems, leave the machine ready in 15 minutes.
In my case, buy the converter and a 12 "LCD is not how to upload...
FLjoyride Hello, I have two Interact 412 with Heidenhain TNC 151, one monitor stopped working and could not be repaired and put one video converter of Chinese origin and a lcd with this solves the...
George, I need to know how to remove the tops of the bearings, if you could tell me how you would have solved everything ago. Would not have a scheme of this head?
George, I know how to withdraw the shaft bearings of the spindle, I have everything disassembled less bearings, tomorrow I put a photograph of the shaft bearings.
Thanks George for your advice, I must also do the repair myself and that where I am (Argentina) can not find someone qualified for the job, so it is seeking information for the job is well done.
I need help fixing a spindle of a Bridgeport Interact 412, if anyone has a schematic or a manual I thank them very much, I have no information of the machine and I have to change the bearings urgent....
Hey guys, I have two Bridgeport Interact machining centers 412, equipped with Heidenhain 151 / Q.
After many problems, drivers, servo motors, encoders and Heidenhain problematic 151.
The main...