Search:

Greetings.
We are having an issue routing an mdf "wave" type wall panel with Vectrics Aspire program.
We have done this same panel before with no problems. Please see the attached photos.
The...

this is biesse's "program editor" on older machines. Still runs in background
for biesseworks.

john

Malt
If you have access to Aspire, I would use that! It most certainly can do what those videos are showing.
We do it all the time. Best bet is to try and use a 3d model (.stl) instead of a photo....

Jeroen

Make sure the floppy disc has been formatted to biesse NC format.
I assume you are doing the cad work in the office, saving dxf
to floppy then taking floppy out to the machine?

John

Jeroen

Draw a rectangle to represent the panel.
This will need to be on a layer named.......panel19 for 19mm thk
panel6P35 for 6.35mm thk and so on.

For the shape to rout, it must be a...

James

There is an icon on left side of screen in Biesseworks that will "export nc code". You can then look at that.

John

Erez
Dont think it is possible. The new machines use a different controller. We have an older Biesse
Rover321 and can not use the same files over on our newer RoverG.

John

John
We use Autocad with Biesseworks. If all you want to do is import geometry, then just make sure it is on a generic layer. (Not rotor, panel, vertical, etc) Save as R12 dxf format saving just...

didja get it figured out?

On our machine we are able to create a "worklist" of different programs. When one program is finished, clean off table and load the next sheet for the next program.

John

Never mind

Got it :wave:

John

Might be a stupid question.
I need to have my line numbers formated like:
N10
N20
N30.....

but am getting

;NNNN
;NNNN

Greetings
We have a new Biesse Rover G flat table 5x12 router running Biesseworks. Problem is feed speed on the router with small dia. holes, eg. 7.493mm dia hole using 6.35mm dia router bit with...

greenbatman,

Did you ever get your batch processing figured out?
Have the same problem here,also (rover b ft)

John