I have value v-i220sv it oil pump.
-2 psi was wrong , there was a leaking ...sorry for that. My vacum table project still in progress :)
Type: Posts; User: tommy78
I have value v-i220sv it oil pump.
-2 psi was wrong , there was a leaking ...sorry for that. My vacum table project still in progress :)
Cylinder and pomp I bought in one shop, they say it woks fine together, cylinder is quite large it can go as much as 100 tons.Pomp is 700 bars.
Power that I to push the lever with my muscles is...
Gosh...why would I need to change the oil tank ??? what is oil tank ? The pomp is one piece I dont thin I can add any "oil tank" to that...
Also why would I need 3 phase? would it be that...
my pomp is able to make it 700bars, and the press with cylinder as much as 100 tons. to make it 400bars with my muscles I need to work pretty hard.
Hi filks, I have that pomp Hydraulic Hand Pump (700 Bar - 2700 cm3) - EZ-Tools Professional Tools
and when I work it I need to pomp as far as 400bars, I am looking to help myself and make an...
I can cheap order a stell 10mm thick to replace that mdf, will that be any better ?
I was told by a mechanic that only aluminium minimum 20mm would be good for it
Can I have that table made this way, will that be flexible or will it be OK for working on 5mm plexi engraving that I mostly do ?
I plan to make it out of 28mm MDF and 10mm Pleksi
...
Hi folks, I am making my vacuum table out of 1'' solid MDF wood board,
can I move my Hiwin Blocks close to the centre of my aluminium table ?
doing that I will get like 8 inch extra in my Y axis...
thay say its becouse of very small area of the cable that is active sucking section...if I multiply that by 30 it would hold many kilos....at least this is what I was told...
many thanks for more help :)
more questions
1. is that ''normal pressure that should be displayed when I close the cable coming out from the pomp - 10mm cable - with my finger ?...
will that be OK ?
Zasilacz impulsowy 24 VDC, 1A ?
I want to make relief of world map - Asia, America etc. Where to get the files?
Anyone knows if will I get any free files or will I need to get a designer to draw it from scratch ? Anyone...
many thanks for help mr jonh 100 .
I have all knowledge to make it work.
Will post pics when finished !
how to set N/O in my Moeller device?
my one is PNP - it says on the sticker.
you sure I will need extra device ?
like this one ?
STYCZNIK MOCY DILM7-10(24VDC) 3P 7A 24V DC 276565 EATON MOELLER
here is all detail for that vacuum switch
http://www.portalnaukowy.edu.pl/allegro/karty_katalogowe/vs-d.pdf
thanks for that diagram, looks way easier :)
gosh i dont understand much out of that ...I was thinking that will be like plug in and start working...
Hi folks,
I have a pomp and a switch, I am starting to making my vacuum cnc table.
Do you know how to connect that switch to the pomp ?
What cables will I need for that ?
I have that...
it is effecting vectors , also, if I want to change straight lines into beziers, vectros that were joined properly, they "fall apart" as on the picture....
all this , is not happening when I...
WHen I try to trim beziers, there is alway some tiy bits of vectors left over, it looks like trimming is not working properly with beziers, even if you draw a circle in Apire ( that is a bezier by...
Why there is no ramp option when you want to do reliefs ?
ok , its sorted. I needed different postprocesor. Now is OK .
Hi guys,
I have started working with aspire 4 and have found problem.
At the start of work, my machine is doing some strange move ( first few lines in gcode), that makes my tool brake as it...
Hi folks ;)
I was told that my machine software will be better when I set plunge and feed rate at same speed.
Mostly I work on tool bits 2-3 mm diameter, cutting plexiglass approx. 2mm deep. ...
thanks
Hi
I used to work in artcam but want to move to aspire and I can see its missing one function which I found very useful -
how to make object to slope?
...
edit
Hi
I am working mostly on small sizes of wood and plexiglass, and just wondering if any of you have any experience with this system of attatching material
Hot table so you can melt glue to...
I have around 50 ton hydraulic press. I did samples out of copper 0.3mm - acrylic die and a rubber and it looks ok as for decorative items >>
...